Environmental Protection; Technical Specifications - Metabo DSE 300 Manual Original

G "Cling-fit" hard felt plate
H Scraper blades (various blade widths)
I Carbide-tipped scraper blade
J Trowel (spring steel)
K Vacuum extraction nozzle with plug
L Paper dust bag holder with cover and
dust filter
M Dust filter (standard, unbleached)
N Suction hose (5 m in length)
O 35/58 mm adapter (for connecting the suction
hose to a Metabo all-purpose vacuum cleaner
or Metabo special suction unit)
P Adapter (for connecting the suction hose to a
domestic vacuum cleaner)
For complete range of accessories, see
www.metabo.com or the main catalogue
11.1 Fitting/removing the special perforated
base-plate
Fitting
Position the special perforated base-plate (14) so
that the velcro surface faces down and the pointed
tip faces forward. Ensure that the two rods on the
sander/scraper engage properly in the appropriate
holes in the special perforated base-plate (14).
Screw in and tighten the hexagon socket-head
screw (12), without the spring (11) fitted, using the
hexagon socket-head key (6).
Removing
To remove the special perforated base-plate (14),
reverse the steps for the fitting procedure
indicated above.
11.2 Fitting/removing the scraper blade
Be aware of the risk of injury
represented by sharp tool edges!
Fitting
Position the scraper blade (15) so that the blade is
facing down at the front and the scraper blade
locates between the two rods on the
sander/scraper.
Screw in and tighten the hexagon socket-head
screw (12), without the spring (11) fitted, using the
hexagon socket-head key (6).
Removing
To remove the scraper blade (15), reverse the
steps for the fitting procedure indicated above.
All manuals and user guides at all-guides.com
12 Repairs
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please attach a description of the fault to the
power tool.

13 Environmental Protection

Metabo packaging is 100% suitable for recycling.
Power tools and accessories at the end of their
service life still contain large amounts of valuable
raw materials and plastics which can likewise be
fed back into a recycling process.
As the dust generated during operation may
contain harmful materials, it should not be
disposed of along with normal household waste,
but delivered to a collection point for special
waste.
These Operating Instructions are printed on paper
produced in a chlorine-free bleaching process.
electric equipment and its implementation in
national legal systems, used power tools must be
collected separately and handed in for
environmentally compatible recycling.

14 Technical Specifications

Notes on the information printed on page 2.
We reserve the right to undertake modifications
to reflect technical advances.
n
1
n
2
P
1
P
2
m
Vibration total value (vector sum of three
directions) determined in accordance
with EN 60745:
a
h
K
h
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
EN 60745 and may be used to compare one tool
with another. It may be used for a preliminary
assessment of exposure.
ENGLISH
Repairs to power tools must be carried
out by a qualified electrician only.
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline
2002/96/EC on used electronic and
= orbital frequency at no load
= orbial frequency at nominal load
= rated input
= outout power
= weight
= Vibration emission value
(sanding surfaces)
= Unsafe (vibration)
15