Initial Screen. Measuring Ph Or Mv; Printing The Readings; Storing Readings; Deleting Readings - Selecta pH-2004 Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80201 REV A
7.03
pH
25.0ºC
MTC
Meassuring screen
PRN
Print stored reading screen.
DEL
Delete stored readings
VIEW

Viewing stored readings

7.03
pH
25.0ºC
N001
Press «ENTER» to view
next reading.
J
.P. SELECTA s.a.

6.4 Initial screen. Measuring pH or mV.

After switch on pH-2004 (Key «ON/OFF») and probes are connected, it
starts to read pH and temperature. Press «
The reading in mV can be used to work with ion selective electrode or
REDOX electrode. It is also useful for electrode status evaluation.

6.5 Printing the readings

If the pH-2004 has been connected to a serial printer(RS-232) reading
can be printed.
• Instantaneous printing: Pulsar «ENTER / PRINT»
• Printing stored readings: (See 6.6).
• First select pH or mV. Because both are printed separately.
• Press «MODE/MEAS»
• Press «
• Press «ENTER/PRINT» to validate.

6.6 Storing readings

Directly from the measuring screen press «
actual reading. The pH and mV reading are stored, printed and deleted
separately.
First select pH or mV.
Up to 250 reading can be stored. If more than 250 are stored the new
ones are stored over the oldest.

6.7 Deleting readings

Deleting stored reading:
• First select pH or mV. Because both are stored separately.
• Press «MODE/MEAS»
• Press «
• Press «ENTER/PRINT» to validate.
6.8 Viewing stored readings
Viewing stored readings:
• First select pH or mV. Because both are viewed separately.
• Press «MODE/MEAS»
• Press «
• Press «ENTER/PRINT» to validate.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: www.grupo-selecta.com
FEB 2013 (Sujetas a modificaciones sin previo aviso)
/ SAVE» until get PRN screen.
/ SAVE» to DEL screen.
/ SAVE» to VIEW screen.
/pH/mV» to read mV. .
/ SAVE» to store the
Tel 34 937 700 877 Fax 34 937 702 362
Pág..: 16