Colour System / Aspect Auto; 3:2 Pulldown - Yamaha PDM-1 Instrucciones De Operación

Colour system / Aspect Auto

Select Signal from the "Setup" menu during AV(S Video) input signal mode.
("Signal [AV]" menu is displayed.)
Mode
Colour system
Aspect Auto
(4:3)

3:2 Pulldown

When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are
recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.
Select "Signal" from the "Setup" menu during AV(S Video) or Component
input signal mode.("Signal [AV]" menu is displayed.)
Note:
When On, this setting only affects the following signal input.
• NTSC signal input during "AV(S Video)" input signal mode.
• 525i(480i) signal input during "Component" input signal mode.
R
Press to select the "Colour system" or "Aspect Auto".
Press to select each functions.
If the picture image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Set the colour system to match the input signal. If set to "Auto", the colour system is
determined automatically.
Auto PAL
Set to "4 : 3" to view 4:3 images in an unchanged format when Aspect Auto is selected.
If you would like to view 4:3 images in "Just" format, set to "Just".
Press to select 3:2 Pulldown.
Press to set On/Off.
Press to exit from adjust mode.
Setup for Input Signals
Function
SECAM M.NTSC
Setup
Component/RGB-in select
RGB
Signal
Screensaver
English ( UK )
OSD Language
Set up TIMER
Press (ACTION) button
Signal
3D Y/C Filter ( NTSC )
On
Colour system
Auto
3:2 Pulldown On
Aspect Auto ( 4:3 )
4 : 3
NTSC
Setup
Component/RGB-in select
RGB
Signal
Screensaver
English ( UK )
OSD Language
Set up TIMER
Press (ACTION) button
Signal
3D Y/C Filter ( NTSC )
On
Colour system Auto
On
3:2 Pulldown
Aspect Auto ( 4:3 )
4 : 3
[ Component ]
Signal
3:2 Pulldown On
[ AV ]
[ AV ]
31