Disassembly And Disposal; Maintenance - SICK WTL16 Instrucciones De Operación

8

Disassembly and disposal

9

Maintenance

8022692.10DR | SICK
Subject to change without notice
LED indicator/fault pattern
Object is in the path of the
beam, yellow LED does not
light up
The sensor is not displayed in
SOPASair
No connection can be made
to the sensor
The sensor must be disposed of according to the applicable country-specific regula‐
tions. Efforts should be made during the disposal process to recycle the constituent
materials (particularly precious metals).
NOTE
Disposal of batteries, electric and electronic devices
• According to international directives, batteries, accumulators and electrical or
electronic devices must not be disposed of in general waste.
• The owner is obliged by law to return this devices at the end of their life to the
respective public collection points.
•
This symbol on the product, its package or in this document, indicates
that a product is subject to these regulations.
SICK sensors are maintenance-free.
We recommend doing the following regularly:
• Clean the external lens surfaces
• Check the screw connections and plug-in connections
No modifications may be made to devices.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
DISASSEMBLY AND DISPOSAL
Cause
Distance between the sensor
and the object is too long or
sensing range is set too short
1. Connection to another
hand-held exists.
2.The hand-held is outside of
the transmission range of the
sensor.
3. Bluetooth LE in the sensor
is deactivated.
4. Bluetooth LE in the hand-
held is deactivated.
5. MAC address filter acti‐
vated, hand-held not autho‐
rized.
1. The Android or iOS version
does not comply with require‐
ments.
2. SOPASair version does not
contain the required driver.
Measures
Increase the sensing range
1. No connection or deactiva‐
tion of the existing connection.
2. Thorough check of installa‐
tion situation (e.g. shielding by
metal).
3. Activation of Bluetooth LE
via SiLink2 master or IO-Link
4. Activation of Bluetooth LE
5. No or change to MAC
address filter.
1. Check the operating system.
2. Uninstall SOPASair, install
the most current app version.
8
15