Operation - Flex VCE 35 L AC Manual De Instrucciones

Removing the disposal bag
Illustration
 Release and remove the suction head.
 Pull the disposal bag up.
 Pull the opening of the disposal bag out
toward the back over the suction sup-
port and seal it tightly.
 Tightly seal the disposal bag with clo-
sure strips underneath the opening.
 Remove the disposal bag.
 Dispose of the used disposal bag ac-
cording to the local provisions.
 Insert and lock the suction head.
– To vacuum wet dirt, always remove the
disposal bag.
General
– If wet dirt is vacuumed with the uphol-
stery or crevice nozzle (option) or if wa-
ter is sucked up from a container it is
recommended to deactivate the "auto-
matic filter dedusting" function.
– If the maximum liquid level is reached
the appliance will turn off automatically.
– In case of non-conductive liquids
(such as emulsion drilling fluids,
oils, and greases) the appliance is
not turned off when the container is
full. The filling level must be continu-
ously monitored and the container
must be emptied in time.
– After completion of the wet vacuuming:
Clean the flat pleated filter using the fil-
ter dedusting unit and allow the filter to
dry sufficiently. Clean the electrodes
using a brush. Clean the container with
a damp rag and dry it.
Clip connection
Illustration
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.
18
Turning on the Appliance
 Plug in the mains plug.
 Switch on the appliance at the main
switch.
Adjust the suction output
 Set the suction output (min - max) at the
rotary switch.
Regulating the suction power
 Regulate the suction force on the suc-
tion force regulator (continuous).
Working with electrical power tools
DANGER
Risk of injury and damage! The socket out-
let is only for the connection of power tools
to the vacuum cleaner. Any other use of the
socket outlet is not permitted.
 Connect the mains plug of the electric
power tool to the vacuum cleaner.
 Switch on the appliance at the main
switch.
Indicator lamp is on; vacuum cleaner is in
the standby mode.
Note: The vacuum cleaner is turned on and
off automatically with the electric power tool.
Note: The vacuum cleaner starts automat-
ically within 0.5 seconds and continues to
run for 15 seconds after the power tool has
being switched off.
Note: Please refer to "Technical specifica-
tions" for the power connection specifica-
tions of the power tools.
Illustration
 Adjust the universal adapter to the con-
nection of the electric power tool.
Illustration
 Remove the elbow from the suction
hose.
 Insert the universal adapter on the suc-
tion hose.
Illustration
 Connect the universal adapter to the
electric tool, cut to the required diame-
ter if necessary.
– 4
EN

Operation