Eliminating Malfunctions; Maintenance And Cleaning - Festo Sodium Vapour Lamp EduTrainer Manual De Instrucciones

•
Temperature sensor Pt100
The built-in temperature sensor Pt100 allows you to measure the reflector temperature. The change in the
resistance of the sensor can be measured using an Ohmmeter and converted using the table below.
Resistance/temperature table Pt100
Temperature Resistance
0°C 100.00 Ω
103.90 Ω
10°C
107.79 Ω
20°C
111.67 Ω
30°C
115.54 Ω
40°C
119.40 Ω
50°C

10 Eliminating malfunctions

Problem
The circuit is not working.
The light does not come on

11 Maintenance and Cleaning

The device is maintenance-free. Use a slightly damp, lint-free cleaning cloth without any abrasive, chemical,
or solvent-containing cleaning agents.
© Festo Didactic 8064068
Temperature Resistance
60°C 123.24 Ω
127.07 Ω
70°C
130.89 Ω
80°C
134.70 Ω
90°C
138.50 Ω
100°C
142.29 Ω
110°C
Solution
• Check supply voltage.
• Check the wiring.
• Check the wiring.
• Lamp defective. Contact our Service department.
Temperature Resistance
120°C 146.06 Ω
149.82 Ω
130°C
153.58 Ω
140°C
157.31 Ω
150°C
175.84 Ω
200°C
194.07 Ω
250°C
33