Würth DIGA CSM-1 POWER Traducción Del Manual De Instrucciones De Servicio Original página 28

Ocultar thumbs Ver también para DIGA CSM-1 POWER:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
Noise hazards
Unprotected contact with high noise levels can
result in permanent hearing damage, hearing
loss and other problems such as tinnitus (rin-
ging, buzzing, whistling or humming noise in
the ears). A risk assessment and the introduc-
tion of suitable checks for such hazards are
therefore vital.
Suitable measures for reduction of the risk
include, amongst others, material insulation
measures in order to prevent workpieces from
"ringing".
Use suitable hearing protection.
Operate and maintain the tool according to
the recommendations in the sections Working
Instructions and Maintenance/Care to prevent
an unnecessarily high noise level.
Vibration hazards
Appropriate information is essential for car-
rying out a risk assessment of these hazards
and implementing suitable checks.
Vibrations can result in harm to the nerves and
blood supply of the hands and arms.
When working in cold conditions, wear warm
clothing and keep your hands warm and dry.
If you notice any numbness, tingling, pain or
whitening of the skin of your fingers or hands,
consult a qualified occupational health practiti-
oner and tell them about all of your tasks.
Operate and maintain the tool according to
the recommendations in this manual to prevent
an unnecessary increase in the vibration level.
Hold the tool with a light but secure grip be-
cause the risk of vibrations is generally higher
if more force is used during gripping.
If an operator is exposed to tool vibrations
for a long time, there is a risk that they will be
subject to repeating loads.
Additional safety instructions for
gas-operated devices
Gas-operated devices may only be used with
the gas cartridges listed in the Technical Data.
Apply extra caution when using gas-operated
devices because they can become hot, impai-
ring your grip and control.
Only use gas-operated devices in well-venti-
lated rooms.
28
Safety instructions
If liquid flammable gas comes into contact
with the skin, injuries may result.
Ensure that flammable materials are not
exposed to hot exhaust gases.
Do not use gas-operated devices in explosive
areas because sparks in the device can cause
fires or an explosion.
A small quantity of gas may be released
during normal operation with gas-operated
devices.
Gas canisters must be labelled according to
the relevant transport regulations.
Precautions for the gas cartridge
Handle the gas cartridge carefully and check
it for damage. Damaged gas cartridges can
explode and cause injuries.
Always read and comply with the instructions
on the gas cartridge.
Store the gas cartridge in a well-ventilated
area.
Do not expose the gas cartridge to direct
sunlight.
Do not leave gas cartridges in a vehicle or
luggage compartment in which the tempera-
ture could increase. Otherwise, they could
explode. Even a used empty gas cartridge
still contains flammable propellant gas,
which could expand and cause a canister to
explode.
Do not store gas cartridges in an ambient
temperature of greater than 40 °C.
The fuel cell contains pressurised flammable
gas. If it is exposed to temperatures greater
than 40 °C, gas could escape or it could
burst causing a fire.
Do not inhale the gas.
Do not burn or recycle empty gas cartridges.
Never spray the gas towards a human body.
Only remove the rubber plugs on the bottom
side of the gas cartridge for disposal pur-
poses.
Do not make any holes in the gas cartridge,
e.g. by hammering a nail into it.
Disposal must be carried out in accordance
with official regulations.
Dispose of contents/containers in accordance
with the sorting instructions provided by the
licensed waste collector.
Tabla de contenido
loading

Este manual también es adecuado para:

0864 94

Tabla de contenido