Daily Cleaning; Cleaning For Prolonged Deactivation - MBM FP01V Instrucciones Para El Funcionamiento

4.
ROUTINE MAINTENANCE

Daily cleaning

•
Wait for the temperature of the grill to cool off so that the operator is not burnt.
Do not use pressurised or direct water jets.
1- Lift the cooking grill, and using a non-abrasive sponge, clean the entire surface
thoroughly with soapy lukewarm water.
2- Rinse the parts and carefully dry all the surfaces using non-abrasive material;
Afterwards dry it thoroughly and put it back in place.
3- Remove, drain and carefully wash the drawer, after the cleaning operations dry it and
put it back in its seat.
4- Carefully reposition all of the parts removed in their housing, making sure not to invert
the assembly sequence.
If necessary, repeat the operations described above for a new cleaning cycle.

Cleaning for prolonged deactivation

When the appliance remains idle for a long time, perform all the described daily cleaning
procedures.
When the operations are over, protect the parts more exposed to oxidation doing as follows.
•
Use lukewarm water with a bit of soap to clean the parts;
•
Rinse the parts thoroughly, without using pressurised and/or direct water jets;
•
Dry the surfaces carefully using non-abrasive material;
•
Wipe a non-abrasive cloth lightly soaked with food-safe Vaseline oil over all of the
stainless steel surfaces in order to create a protective film.
For appliances with doors and rubber gaskets, leave the door slightly ajar to let it air out
and spread protective talcum powder on the rubber gasket surfaces.
Air out the appliances and rooms regularly.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 12 - 12