Before Assembly
A
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:
A
Main Gate Panel (2)
Wall Mount Hinge, Snap,
B
Female (1)
Wall Mount Hinge, Snap,
C
Male (1)
Latch Assembly, Mount
D
Wall, Hinge (1)
BEFORE USING PRODUCT
Read and follow all instructions carefully to ensure that
your gate and extensions are properly installed. Improper
installation could result in the gate becoming unstable or
dislodged from the doorway. Always make sure the
extension is securely attached to the gate before using.
The safety of your child is your responsibility. Please keep
these instructions for your reference.
IMPORTANT
• Mounting hardware must be mounted into a stud in the wall.
• Gate must be mounted at the top of the stairway, at least 6"
back from the front edge of the top stair.
• Hinge must be on the right side when facing the closed gate.
• Gate must swing away from stairs when opening.
B
E
F
C
I
G
D
E
Lower, Mount, Wall Hinge (1)
F
Lower, Mount, Wall (1)
G
Hinge Adjuster Knob (2)
H
Receiver Adjustment Knob (2)
H
I
J
I
2" Wood Screw (8)
J
Coupler, Male (2)
K
Coupler, Female (2)
MODEL NO. 1250, 1250 B
Manufacturer recommendations:
• For children ages 6 months to 24 months
• When mounting:
• The minimum opening allowed is 24"
• The maximum opening allowed is 40.5"
• The maximum spacing from the floor to bottom of the
gate is 2 1/2"
• The maximum spacing from the wall to the tube is 2 1/2"
• The minimum spacing from the edge of the top stair to
the gate is 6"
CARE AND MAINTENANCE
Periodically check the gate for signs of damage, wear, or
missing components. Do not use if any part is missing,
worn or damaged. Check the gate regularly to ensure all the
hardware and mountings are tightened. Do not use abrasive
cleaners or bleach. Clean by sponging with warm water and
a mild detergent.
English
K