Technical Parameters - GRAPHITE 58G215 Traducción Del Manual Original

DANE ZNAMIONOWE
Parameter
Battery voltage
Battery type
Battery capacity
Range of idle rotational speed
Range of quick release chuck
Torque control range
Max. torque
Protection class
Weight
Year of production
Parameter
Supply voltage
Power supply frequency
Charging voltage
Max. charging current
Battery charging time
Protection class
Weight
Year of production
NOISE AND VIBRATIONS DATA
Information on noise and vibrations
The emitted noise levels, such as the level of emitted acoustic pressure Lp
Lw , and the measurement uncertainty K are given below in the instruction in accordance with the EN
A
60745 standard.
The vibration values a and the measurement uncertainty K, determined in accordance with the EN 60745-
h
2-1 standard, are given below.
The vibration level given below in this instruction was measured in accordance with a measurement
procedure set forth in the EN 60745 standard and can be used for comparing power tools. It can also be
used for preliminary evaluation of exposure to vibrations.
The vibration level given here is representative for the basic uses of the power tool. If the power tool is
used for other purposes or with other bits, or if the power tool is not maintained properly, the vibration
level may change. Also, these conditions may also result in an increased exposure to vibrations during the
entire work period.
In order to accurately estimate exposure to vibrations, one must consider periods when the power tool
is switched off or when it is switched on and not used for work. This way, the total exposure to vibrations
may turn out to be much lower. One must implement additional safety measures in order to protect the
user from the consequences of vibrations, such as maintenance of the power tool and of the working tools,
ensuring proper temperature of the hands, and proper organization of work.
Sound pressure level: Lp
A
Sound power level: Lw = 72,9 dB (A) K=3dB (A)
A
Vibration acceleration a = 1,068 m/s
h

TECHNICAL PARAMETERS

Cordless drill
gear I
gear II
Charger
= 61,9 dB (A) K=3dB (A)
2 K = 1,5 m/s 2
14,4 V DC
1500 mAh
0-350 min
0-1150 min
1-10 mm
1 – 19 plus drilling
230 V AC
17 V DC
1500 mA
and the level of acoustic power
A
20
Value
Li-Ion
-1
-1
21 Nm
III
1,12 kg
2016
Value
50 Hz
75 min
II
0,18 kg
2016