Technical Parameters; Rating Data - GRAPHITE 58G221 Instrucciones De Uso

página de 157

/ 157
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Put an Allen key in the chuck and gently tap the other end of the key.

Unscrew the chuck.

In order to install the chuck, perform the above actions in a reverse order.

Any and all defects must be removed by service companies authorized by the manufacturer.

RATING DATA

Parameter

Battery voltage

Battery type

Battery capacity

Range of rotational speed in the idle gear

Range of chuck

Range of torque control

Max. torque (soft drive)

Max. torque (hard drive)

Protection class

Weight

Year of manufacture

Parameter

Supply voltage

Supply current frequency

Charging voltage

Max. charging current

Charging time

Protection class

Weight

Year of manufacture

NOISE AND VIBRATIONS DATA

Information on noise and vibrations

The emitted noise levels, such as the level of emitted acoustic pressure Lp

, and the measurement uncertainty K are given below in the instruction in accordance with the EN

60745 standard.

The vibration values a

and the measurement uncertainty K, determined in accordance with the EN 60745

standard, are given below.

The vibration level given below in this instruction was measured in accordance with a measurement

procedure set forth in the EN 60745 standard and can be used for comparing power tools. It can also be

used for preliminary evaluation of exposure to vibrations.

The vibration level given here is representative for the basic uses of the power tool. If the power tool is

used for other purposes or with other bits, or if the power tool is not maintained properly, the vibration

level may change. Also, these conditions may also result in an increased exposure to vibrations during the

entire work period.

In order to accurately estimate exposure to vibrations, one must consider periods when the power tool

is switched oﬀ or when it is switched on and not used for work. This way, the total exposure to vibrations