Westinghouse Petite Manual Del Usuario
Ocultar thumbs Ver también para Petite:

Enlaces rápidos

OWnEr'S ManuaL
ManuaL dEL uSuariO
Petite
Please write model number here for future reference: /
Por favor, incluya el número del modelo aquí para futura referencia:
net Weight: 10.3
Peso neto:
1
ETL-ES-Petite-WH14
LBS
4.7
KGS
Tabla de contenido
loading

Resumen de contenidos para Westinghouse Petite

  • Página 1 ETL-ES-Petite-WH14 OWnEr'S ManuaL ManuaL dEL uSuariO Petite Please write model number here for future reference: / Por favor, incluya el número del modelo aquí para futura referencia: net Weight: 10.3 Peso neto:...
  • Página 2: Safety Tips

    ETL-ES-Petite-WH14 Safety tiPS OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT TO OUTLET BOX MARKED ‘ACCEPTABLE FOR FAN SUPPORT OF 15.9 KG (35 LBS) OR LESS’ AND USE MOUNTINGSCREWS PROVIDED WITH THE OUTLET BOX AND/OR SUPPORT DIRECTLY FROM BUILDING STRUCTURE.
  • Página 3: Consejos De Seguridad

    ETL-ES-Petite-WH14 ConSejoS De SeguriDaD HAGA LO SIGUIENTE: LEA Y GUARDE ESTAS INSTRUCCIONES ADVERTENCIA - PARA REDUCIR EL RIESGO DE INCENDIO, DESCARGA ELÉCTRICA O LESIONES PERSONALES, MONTE EN UNA CAJA DE EMBUTIR ROTULADA “ADECUADA PARA VENTILADORES DE 15,9 KG (35 LB) O MENOS”...
  • Página 4 ETL-ES-Petite-WH14 FEaTurES CaraCTEríSTiCaS COMBO-BLADE Combo-Blades feature two high quality finishes on one blade. Select the one that best complements your decor, or change the style with just a flip of the blade. NOTE: Combo-Blade finishes vary, depending upon model. ASPAS DE DOBLE CARA Las aspas del rotor de doble cara presentan dos superficies con un acabado de alta calidad.
  • Página 5: Preparing For Installation Antes De La Instalación

    ETL-ES-Petite-WH14 PrEParinG FOr inSTaLLaTiOn anTES dE La inSTaLaCión Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling member (a loose box will cause the fan to wobble).
  • Página 6: Mounting Bracket Installation Instalación Con Soporte De Montaje

    ETL-ES-Petite-WH14 MOunTinG BraCKET inSTaLLaTiOn inSTaLaCión COn SOPOrTE dE MOnTajE Remove the screws and star washers (1) from the bracket as shown above. Loosen (do not remove) the screws (2) from the bracket as shown above. Install mounting bracket to outlet box in ceiling using the screws and washers Remove screws from motor bracket and mounting plate.
  • Página 7: Montaje

    ETL-ES-Petite-WH14 MOunTinG MOnTajE While fan is hanging from the mounting plate, connect the wires with wire connectors (included), using the following steps for wiring options. Mientras el ventilador está colgado de la placa de montaje, conecte los cables con los conectores para cables (incluidos)
  • Página 8: Wiring Options

    ETL-ES-Petite-WH14 WirinG OPTiOnS OPCión dE CaBLEadO WaLL COnTrOL WirinG OPTiOn PuLL CHain WirinG OPTiOn Follow diagram above to make wiring connections for fan pull chain control. Follow diagram above to make wiring connections for wall control operation. OPCión dE CaBLEadO Para COnTrOL dE ParEd OPCión dE CaBLEadO Para CadEniLLa dE TirO...
  • Página 9 ETL-ES-Petite-WH14 MOunTinG MOnTajE The decorative motor housing has two mating slots (1) and two mating holes (2). Position both slots on the motor housing directly under and in line with two screws in the mounting bracket (3). Lift the motor housing, allowing the two screws to slide into the Install two screws and star washers into the mating holes mating slots.
  • Página 10: Blade Installation Instalación De Las Paletas

    ETL-ES-Petite-WH14 BLadE inSTaLLaTiOn inSTaLaCión dE LaS PaLETaS Check the motor for plastic shipping stabilizer tabs (1), and remove them if they are present. Attach blade assembly to motor using the noise-dampening motor gaskets (2) and motor screws provided. Tighten screws ecurely. NOTE: Some models do not utilize motor gaskets, washers, or stabilizer tabs.
  • Página 11: Light Fixture Installation Instalación Del Artefacto Luminoso

    ETL-ES-Petite-WH14 LiGHT FixTurE inSTaLLaTiOn inSTaLaCión dEL arTEFaCTO LuMinOSO Find the two wires from the switch housing with the tag that says FOR LIGHT. Connect the blue wire from the switch housing to the black wire from the light kit, and connect the white wire from the switch housing to the white wire from the light kit with wire nuts provided.
  • Página 12 ETL-ES-Petite-WH14 Assemble decorative fob and extension chains from hardware bag to fan pull chains by inserting end of chain into chain coupling. Confirm chains are held by lightly pulling both chains in coupling. Sujetar las cadenas largas de tiro con las piezas finales correspondientes, a las cadenas del ventilador, introduciendo el extremo de la cadena larga en la pieza de unión.
  • Página 13 ETL-ES-Petite-WH14...
  • Página 14: Operation And Maintenance

    ETL-ES-Petite-WH14 OPEraTiOn and MainTEnanCE Operation Turn on the power and check operation of fan. The pull chain controls the fan speeds as follows: 1 pull - high; 2 pulls - medium; 3 pulls - low; 4 pulls - off. Speed settings for warm or cool weather depend on factors such as room size, ceiling height, number of fans and so on. The slide switch controls direction, forward or reverse.
  • Página 15: Operación Y Mantenimiento

    ETL-ES-Petite-WH14 OPEraCión y ManTEniMiEnTO Operación Encienda el ventilador y verifique su funcionamiento. La cadenilla de tiro controla las velocidades del ventilador de la siguiente manera: 1 jalón – rápida; 2 jalones - mediana; 3 jalones - lenta; 4 jalones - apagado.
  • Página 16: Troubleshooting Guide

    ETL-ES-Petite-WH14 If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these TrOuBLESHOOTinG GuidE installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself.
  • Página 17: Guía Para Solucionar Problemas

    ETL-ES-Petite-WH14 Si tiene dificultades para hacer funcionar su nuevo ventilador, podría ser a causa del armado, instalación o Guía Para SOLuCiOnar PrOBLEMaS cableado incorrectos. En algunos casos, estos errores de instalación podrían ser confundidos con defectos. Si experimenta alguna falla, consulte esta guía para solucionar problemas. Si no puede solucionar el problema, consulte a un electricista autorizado y no intente reparar conexiones eléctricas.
  • Página 18 ETL-ES-Petite-WH14...
  • Página 19 ETL-ES-Petite-WH14 ParTS LiST LiSTa dE rEPuESTOS description 1 ....Mounting Bracket 2 ....Blade Bracket 3 .
  • Página 20 ETL-ES-Petite-WH14 Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A. www.westinghouselighting.com , WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation. Used under licensee by Westinghouse Lighting All rights reserved. Made in China © 2014 WESTINGHOUSE LIGHTING...

Tabla de contenido