Manuales relacionados para Westinghouse Comet-WH09
Resumen de contenidos para Westinghouse Comet-WH09
- Página 1 ETL-ES-Comet-WH09 OWnEr'S ManuaL ManuaL dEL uSuariO Comet Please write model number here for future reference: / Por favor, incluya el número del modelo aquí para futura referencia: net Weight: 17.64 LBS Peso neto: 8.0 KGS...
-
Página 2: Safety Tips
ETL-ES-Comet-WH09 Safety tipS OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS WaRNiNG: tO ReDUCe tHe RiSK Of fiRe, eLeCtRiC SHOCK, OR peRSONaL iNJURy, MOUNt tO OUtLet BOX MaRKeD "aCCeptaBLe fOR faN SUppORt", aND USe tHe OUtLet SCReWS pROViDeD WitH tHe OUtLet BOX. MOSt OUtLet BOXeS COMMONLy USeD fOR tHe SUppORt Of LiGHtiNG fiXtUReS aRe NOt aCCeptaBLe fOR faN SUppORt aND May NeeD tO Be RepLaCeD. -
Página 3: Consejos De Seguridad
ETL-ES-Comet-WH09 CONSeJOS De SeGURiDaD HAGA LO SIGUIENTE: LEA Y GUARDE ESTAS INSTRUCCIONES ADVERTENCIA: PARA REDUCIR EL RIESGO DE INCENDIO, DESCARGA ELÉCTRICA O LESIONES PERSONALES, MONTE EL VENTILADOR EN UNA CAJA DE EMBUTIR ROTULADA “ADECUADA PARA VENTILADORES”, Y UTILICE LOS TORNILLOS DE MONTAJE INCLUIDOS CON LA CAJA DE EMBUTIR. - Página 4 ETL-ES-Comet-WH09 FEaTurES CaraCTEríSTiCaS DOWNROD vAULTeD CeILING INSTALLATION INSTALLATION FLUSH MOUNT INSTALLATION INSTALACIóN CON INSTALACIóN PARA INSTALACIóN AL RAS vARILLA veRTICAL CIeLORRASOS ABOveDADOS COMBO-BLADe Combo-Blades feature two high quality finishes on one blade. Select the one that best complements your decor, or change the style with just a flip of the blade.
-
Página 5: Preparing For Installation Antes De La Instalación
ETL-ES-Comet-WH09 PrEParinG FOr inSTaLLaTiOn anTES dE La inSTaLaCión Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling member (a loose box will cause the fan to wobble). -
Página 6: Mounting Bracket Installation Instalación Con Soporte De Montaje
ETL-ES-Comet-WH09 MOunTinG BraCKET inSTaLLaTiOn inSTaLaCión COn SOPOrTE dE MOnTajE Remove the screws and star washers from the two mating holes (1) on the canopy. Loosen (do not remove) the screws in the mating slots (2) on the canopy. Rotate the mounting bracket counter-clockwise and remove from the canopy. - Página 7 ETL-ES-Comet-WH09 MOunTinG OPTiOnS MOunTinG BraCKET inSTaLLaTiOn OPCiOnES dE MOnTajE inSTaLaCión COn SOPOrTE dE MOnTajE Choose a MOunTinG OPTiOn Elija una OPCión dE MOnTajE FLuSH MOunT OPTiOn If flush mount option is selected, proceed to page 8, step 6. OPCión dE inSTaLaCión aL raS Si elige la opción de montaje al ras,...
- Página 8 ETL-ES-Comet-WH09 FLuSH MOunT OPTiOn OPCión dE inSTaLaCión aL raS For flush mount option, raise fan assembly and place onto hook from mounting bracket into a closed hole on the canopy. This will allow for hands free wiring. Guide motor wires through the base of the canopy as shown and attach canopy PrOCEEd dirECTLY TO PaGE 13 FOr WirinG OPTiOnS.
-
Página 9: Para Cielorraso Normal
ETL-ES-Comet-WH09 nOrMaL dOWnrOd OPTiOn EXTEndEd dOWnrOd OPTiOn OPCión COn VariLLa VErTiCaL OPCión COn VariLLa Para CiELOrraSO nOrMaL VErTiCaL MÁS LarGa Feed motor lead wires through downrod/canopy assembly and insert downrod into downrod yoke. Make sure to align hole in downrod with the hole in downrod yoke. Install yoke cross pin (1) through yoke and downrod. - Página 10 ETL-ES-Comet-WH09 EXTEndEd dOWnrOd OPTiOn OPCión COn VariLLa VErTiCaL MÁS LarGa Re-install pin into extended downrod, and slide downrod ball up to the top of the downrod. Re-install set screw to secure ball to downrod. Note: Some extended downrods have a pre-drilled set-screw hole.
- Página 11 ETL-ES-Comet-WH09 EXTEndEd dOWnrOd OPTiOn OPCión COn VariLLa VErTiCaL MÁS LarGa Feed motor lead wires through downrod/canopy assembly and insert downrod into downrod yoke. Make sure to align hole in downrod with the hole in downrod yoke. Install yoke cross pin (1) through yoke and downrod. Insert clamp pin (2) into cross pin until it snaps into place. Tighten set screws (3) in yoke.
-
Página 12: Montaje
ETL-ES-Comet-WH09 MOunTinG MOnTajE Carefully lift fan assembly onto mounting bracket. Rotate fan until notch on downrod ball (1) engages the ridge on the mounting bracket (2). This will allow for hands free wiring. With bracket holding fan assembly, make electrical connections using the Levante con cuidado el conjunto del ventilador hasta el soporte de montaje. -
Página 13: Wiring Options
ETL-ES-Comet-WH09 WirinG OPTiOnS OPCión dE CaBLEadO PuLL CHain WirinG OPTiOn WaLL COnTrOL WirinG OPTiOn From Fan: From House: From Fan: From House: White (common) Wall Control White (common) White (common) White (common) (connect) (connect) Black (hot) Black (hot) Black (hot) -
Página 14: Secure To Ceiling Asegure El Ventilador Al Cielorraso
ETL-ES-Comet-WH09 SECurE TO CEiLinG aSEGurE EL VEnTiLadOr aL CiELOrraSO For flush mount fans, carefully lift fan from the mounting bracket, making sure not to break any wire connections. For downrod fans, slide the canopy up to the mounting bracket. Para ventiladores de instalación al ras, levante con cuidado el ventilador del soporte de montaje asegurándose de que no interrumpa ninguna conexión de los cables. -
Página 15: Blade Installation Instalación De Las Paletas
ETL-ES-Comet-WH09 BLadE inSTaLLaTiOn inSTaLaCión dE LaS PaLETaS Check the motor for plastic shipping stabilizer tabs (1), and remove them if they are present. Attach blade assembly to motor using the noise-dampening motor gaskets (2) and motor screws provided. Tighten screws securely. -
Página 16: Light Fixture Installation Instalación Del Artefacto Luminoso
ETL-ES-Comet-WH09 LiGHT FiXTurE inSTaLLaTiOn inSTaLaCión dEL arTEFaCTO LuMinOSO Screw in retaining disks to hold globe in place. Install light bulbs (included). Attach the molex plug from the fan to the molex from the light Atornille los tornillos de retención para sostener Instale las bombillas de luz (incluidas). - Página 17 ETL-ES-Comet-WH09 Assemble decorative fob and extension chains from hardware bag to fan pull chains by inserting end of chain into chain coupling. Confirm chains are held by lightly pulling both chains in coupling. Sujetar las cadenas largas de tiro con las piezas finales correspondientes, a las cadenas del ventilador, introduciendo el extremo de la cadena larga en la pieza de unión.
-
Página 18: Operation And Maintenance
ETL-ES-Comet-WH09 OPEraTiOn and MainTEnanCE Operation Turn on the power and check operation of fan. The pull chain controls the fan speeds as follows: 1 pull - high; 2 pulls - medium; 3 pulls - low; 4 pulls - off. Speed settings for warm or cool weather depend on factors such as room size, ceiling height, number of fans and so on. The slide switch controls direction, forward or reverse. -
Página 19: Operación Y Mantenimiento
ETL-ES-Comet-WH09 OPEraCión Y ManTEniMiEnTO Operación encienda el ventilador y verifique su funcionamiento. La cadenilla de tiro controla las velocidades del ventilador de la siguiente manera: 1 jalón – rápida; 2 jalones - mediana; 3 jalones - lenta; 4 jalones - apagado. -
Página 20: Troubleshooting Guide
ETL-ES-Comet-WH09 If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these TrOuBLESHOOTinG GuidE installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself. -
Página 21: Guía Para Solucionar Problemas
ETL-ES-Comet-WH09 Si tiene dificultades para hacer funcionar su nuevo ventilador, podría ser a causa del armado, instalación o cableado incorrectos. en algunos Guía Para SOLuCiOnar PrOBLEMaS casos, estos errores de instalación podrían ser confundidos con defectos. Si experimenta alguna falla, consulte esta guía para solucionar problemas. - Página 22 ETL-ES-Comet-WH09...
- Página 23 ETL-ES-Comet-WH09 ParTS LiST LiSTa dE rEPuESTOS description 1 ....Mounting Bracket 2 ....Blade Bracket 3 .
- Página 24 Philadelphia, PA 19154 U.S.A. Philadelphia, PA 19154 U.S.A. Westinghouse Lighting Corporation, Westinghouse Lighting Corporation, a Westinghouse Electric Corporation licensee titular de la licencia de Westinghouse Electric Corporation is a registered trademark of es una marca registrada de Westinghouse Electric Corporation Westinghouse Electric Corporation...