Adding Keygo Remote Controls; Maintenance; Checks - SOMFY ROLLIXO SMART io Manual De Usuario

EN
With a 3-button remote control
3.2.5 Operation in sequential mode with automatic closing after time delay
The door closes automatically after a time-out programmed during installation.
A new command during this time-out cancels automatic closure and the door remains open.
The following command causes the door to close.
3.3

Adding Keygo remote controls

CAUTION
This operation must be carried out close to the receiver.
This operation is used to copy the func-
tion of a button on a memorised Keygo
remote control to a button on a new
Keygo remote control.
Remote control "A" = "source" remote control already memorised
Remote control "B" = "target" remote control to be memorised
For example, if the button on remote control A opens the door fully, the button on the new remote control
B will also open the door fully.
4

MAINTENANCE

4.1

Checks

4.1.1 Safety devices
Check for correct operation every 6 months.
14
1) 2)
A
B
©
Copyright 2020 SOMFY ACTIVITES SA. All rights reserved.
ROLLIXO SMART io
3)
2s
4)