Haier QFD15 Serie Manual Del Propietário página 7

USING THE DRYER
My Cycle
G
My Cycle
Set up your favorite combination of settings for each cycle and save them here for one touch recall.
These custom settings can be set while a cycle is in progress. NOTE: you can store one My Cycle
combination of settings for each cycle.
To store a My Cycle combination of settings:
1. Select your drying cycle.
2. Change Temp and Level settings to fit your needs.
3. Select any drying options you want.
4. Press and hold the
To recall your stored My Cycle combination:
Select the cycle and press the
To change your stored My Cycle combination:
Repeat steps 1–4.
Lock
B H
Lock
You can lock the controls to prevent any selections from being made. Or you can lock or unlock the
controls after you have started a cycle.
Children cannot accidentally start the dryer by touching pads with this option selected.
To lock the dryer, press and hold the lock (
screen will appear.
To unlock the dryer controls, press and hold the unlock (
disappear.
The control lock icon on the display will light up when it is on.
NOTE: The Power button can still be used when the machine is locked.
Settings
I Settings
Select the gear symbol ( ) in the top right corner to enter the Settings screen.
Volume
When the control panel is powered on, the dryer will beep at the end of the cycle and every time you
press a button on the control panel.
Use the Option pad to select either High, Med, Low, or Off.
NOTE: The selected volume is for both end of cycle and pad sounds.
Language
Use the Option pad to select either English, Spanish, or French.
Brightness
To change the brightness of the screen, use the brightness slider to change from darker to brighter.
WiFi Connect + Tub Light
Use the WiFi Connect + Tub Light toggle button to turn this feature on or off. Toggling this feature on will
enable the WiFi Connect function and enable the usage of the tub light when the door is opened & closed.
Follow the directions on the Wifi Connect screen using the information provided to connect with the GEA
Laundry App. Toggling this feature off will disable the Wifi Connect function and disable the tub light.
NOTE: When the dryer to set up with the GEA Laundry App, new software may be available to
install. After approving the installation of the new software through the GEA Laundry App, the
dryer tub light will flash on and off during the software installation. The dryer tub light will stop
flashing and turn off after the software is done installing.
Start/Pause
J
Start
Start - Press and hold for 1 second to start or restart a cycle.
Pause - If the dryer is running, press and hold for 1 second to pause the cycle. This function can be
used to add garments during a cycle.
NOTE: If the dryer is paused and the cycle is not restarted within 15 minutes, the current cycle will be
cancelled.
Pause
49-3000195
pad for 3 seconds to store your selection. A beep will sound and the icon will light up.
icon before drying a load.
) pad in the top right corner for 3 seconds and a lock
) pad for 3 seconds and the lock screen will
7