EN
2
INSTALLATION
m
CAUTION
The appliance must only be installed by the Sime
Technical Service or by qualified professionals who
suitable protective safety equipment.
MUST wear
2.1
Receiving the product
appliances are delivered in a single unit
Brava Slim HE ErP
protected by cardboard packaging.
The plastic bag found inside the packaging contains the
following:
– Installation, use and maintenance manual
– Paper template for boiler installation
– Certificate of warranty
– Hydrostatic test certificate
– System booklet
– Bag with expansion plugs
d
IT IS FORBIDDEN
Do not leave packaging material around or near
children since it could be dangerous. Dispose of it as
prescribed by legislation in force.
2.2
Dimensions and weight
H
W
Description
W (mm)
D (mm)
H (mm)
Weight (kg)
2.3
Once the packaging has been removed, the appliance is to
be handled manually, tilting it slightly, lifting it and applying
pressure in the points indicated in the figure.
Fig. 9
d
a
2.4
The room where the appliance is to be installed must comply
with the Technical Regulations and Legislation in force. It must
be equipped with suitably sized ventilation openings when the
installation is a "TYPE B" installation.
The minimum temperature of the installation room must NOT
be lower than -5 °C .
m
D
Fig. 10
Brava Slim HE ErP
25
250
28,5
Handling
IT IS FORBIDDEN
To grip the appliance casing. Hold the "solid" parts of
the appliance such as the base and structural frame.
WARNING
Use suitable tools and accident protection when
removing the packaging and when handling the
appliance. Observe the maximum weight that can be
lifted per person.
Installation room
CAUTION
– Before assembling the appliance, the installer MUST
make sure that the wall supports the weight.
– Remember to consider the space needed in order to
access the safety/adjustment devices and to carry
out maintenance interventions (see Fig. 12).
30
35
40
400
250
250
300
700
28,5
30,0
32,5
Fig. 11
73