Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Programming the combo (combined) codes:
for certain combos (TV/VCR, TV/DVD, DVD/VCR, etc.), you
will have to press two keys in diff erent modes in order
to control the two devices the make up the combo. For
example, if you have a TV/DVD Combo, you may have
to set a code using the TV key for the TV set AND a
separate code (using another mode key) to control the
DVD player.
Combo commands:
certain combos (TV/VCR, TV/DVD, DVD/VCR,...) have
separate keys on the original remote control for
selecting the Combo device that you wish to control.
For example, if your Combo is a DVD/VCR, its original
remote control may have separate DVD and VCR keys
for selecting the combo device you wish to control.
You may obtain the equivalent key functions on your
remote control using the Mode and SETUP keys.
Supposing that your Combo has a DVD and a VCR,
and that its code is programmed in DVD mode, hold
down the DVD Mode key for over 1 second in order to
send the DVD key command. In order to send the VCR
key command, press and quickly release the SETUP
key, then press and release the DVD Mode key. This
procedure may apply regardless of the type of Combo
(TV/VCR, TV/DVD, DVD/VCR, etc.), and is available in
all modes. This function is not guaranteed for all the
codes.
System setup
Using the SETUP keys (hold down for 7 seconds), and
5,6,4,3,
the navigation keys
OK
screen in order to access the settings for volume,
SETUP
time, date, backlighting and deleting options. Then
5,6,4,3,
navigate using keys
OK
.
Volume control and Mute setup
This remote control allows you to defi ne the mode that
the Volume and Mute (
) keys will control.
When it is shipped, this remote control is set so that
the Volume and Mute keys control the current mode
the remote control is in. If this mode does not have a
volume control function, then the Volume and Mute keys
automatically control the TV mode.
Volume control and mute setup in one mode
Used to assign to one mode ( TV or AUDIO, or ...) the
Volume and Mute keys (
) without having to select
that mode during daily use.
1. Using the SETUP keys (hold down for 7 seconds),
5,6,4,3,
and navigation keys
followed by SYSTEM SETUP (press OK ) then
CODES
(press OK ) then SET ALL
VOL/MUTE CONTROL SETUP.
VOL. TO 1 MODE
(press OK ) then SET ALL VOL. TO
MODE?
.
2. Press once on the key of the device to be controlled
( TV, DVD, VCR, etc. ).
3. The screen briefl y displays PLEASE WAIT then
before exiting this setup.
SUCCESS
Note
: If the mode selected does not itself display the
Volume/Mute commands, VOLUME CONTROL ERROR is
shown on the screen and the remote control exits the setup
function and returns to normal operation.
Volume control and mute setup in each mode
Used
to
assign
the Volume
(
), for each mode desired.
1. Using the SETUP keys (hold down for 7 seconds),
5,6,4,3,
and navigation keys
followed by SYSTEM SETUP (press OK ) then
SETUP
(press OK ) navigate up
VOL/MUTE CONTROL SETUP
to SET VOLUME FOR 1 MODE (press OK ) then SET
THE VOLUME FOR MODE?.
2. Press once on the key of the device to be controlled
( TV, DVD, VCR, etc. ).
3. The screen briefl y displays PLEASE WAIT then
before exiting this setup.
SUCCESS
Note
: before using this setting, verify that the mode selected
has its own Volume/Mute functions either in the code or
by learning; otherwise, the Volume/Mute keys will have no
eff ect.
Resetting the Volume control and mute control
Used to cancel the settings of the preceding paragraphs
(return to the default factory-installed settings).
1. Using the SETUP keys (hold down for 7
seconds),
, display CODE SETUP followed by SYSTEM
OK
SETUP
(press OK ) then VOL/MUTE CONTROL SETUP
(press OK ) navigate up to VOL/ MUTE CONTROL
RESET.
2. Press OK once.
3. CONFIRM OK TO RESET is displayed.
4. Press OK once to confi rm cancellation.
5. The screen briefl y displays PLEASE WAIT then
SUCCESS
before exiting this setup.
Setting the time
1. Using the SETUP keys (hold down for 7 seconds),
and navigation keys
CODE SETUP
navigate up to TIME SETUP.
2. Press OK once.
3. Set the format to 12 or 24 hours using
confi rm using OK.
4. Set the hour then the minutes using
(move from hours to minutes using OK) and confi rm
using OK.
5. The display briefl y indicates SUCCESS before
returning to CODE SETUP .
Setting the date
1. Using the SETUP keys (hold down for 7 seconds)
and navigation keys
SETUP
followed by SYSTEM SETUP (press OK ) then
navigate up to DATE SETUP
2. Press OK once.
3. Using keys
month, date and day.
4. The display briefl y indicates SUCCESS before
returning to CODE SETUP.
go to the SYSTEM
Setting the backlight
Used for setting the backlight delay following a key
action.
1. Using the SETUP keys (hold down for 7 seconds),
and navigation keys
SETUP
then SYSTEM SETUP (press OK ) and navigate
up to BACKLIGHT SETUP.
2. Press OK once.
3. Using keys
from 5 to 60 seconds, when BACKLIGHT TIME? is
displayed.
Note
: the default time is 10 seconds. In order to deactivate
the backlight function, set the time to 00 and press OK
once.
4. The display briefl y indicates SUCCESS before
returning to CODE SETUP.
, display SET
OK
Setting the LCD display langauge
Used to select one of the 7 languages off ered by your
remote control.
1. Using the SETUP keys (hold down for 7 seconds),
and navigation keys
then SYSTEM SETUP (press OK ) and navigate
SETUP
up to LANGUAGE SETUP.
2. Press OK once.
3. Using keys
LANGUAGE?
4. The display briefl y indicates SUCCESS before
returning to CODE SETUP.
Cancelling your settings
Used to reconfi gure the remote control to the default
and
Mute
keys
settings by erasing all the settings and storage of codes
and keys.
1. Using the SETUP keys (hold down for 7 seconds),
OK
, display CODE
and navigation keys
CODE SETUP
navigate up to SYSTEM RESET.
2. Press OK once.
3. Press OK once when CONFIRM OK TO RESET is
displayed.
4. The display briefl y indicates PLEASE WAIT before
leaving this setting.
Using the SETUP keys (hold down for 7 seconds), and
navigation keys
display in order to access the stand-by settings for the
TV set and 4 other timers that send sequences of at most
4 keys. Then navigate using keys
4
5,6,4,3,
and
navigation
keys
5,6,4,3,
, display
OK
then SYSTEM SETUP (press OK ) and
5,6,
5,6,
5,6,4,3,
, display CODE
OK
5,6,
and OK , successively set the year,
5,6,4,3,
, display CODE
OK
5,6
and OK , set the backlight time,
5,6,4,3,
OK
, display CODE
5,6
and OK , select the language when
is displayed.
5,6,4,3,
OK
, display
then SYSTEM SETUP (press OK ) and
Setting the Timer
5,6,4,3,
OK
, go to the TIMER SETUP
5,6,4,3,
.
OK
and
