THOMSON ROC 56 Manual Del Usuario
Ocultar thumbs Ver también para ROC 56:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21

Enlaces rápidos

01-ROC 56 GB
24/02/04
All manuals and user guides at all-guides.com
This Universal Remote Control is compatible with most models of infrared-controlled TV sets,
video recorders, LVD players, satellite and cable TV receivers.
This remote control has already been programmed so that you can use it to control most of the
audio/video products made by the THOMSON group. Before attempting to programme the
remote control, install 2 batteries (AAA, not supplied) and try it out by using one of the
methods described in this user manual.
Please keep this guide along with the code list (provided separately), so that you can
programme your remote control for use with other products.
1
Indicator lamp: the red indicator lamp lights up when any key is pressed.
2
Product keys (TV, VCR, SAT, DVD or AUX): Used to programme and control different products (TV,
satellite receiver, video recorder, DVD player and so on).
3
G (REW): Goes backward or advances forward (VCR
function in TV mode.
4
RECORD: To record, press the RECORD key twice.
5
STOP: Stops VCR tape advance; in DVD mode, stops disc play; press with green key for fast text
function in TV mode.
6
a/MENU: Teletext On/Off in TV mode; turns on the menu of the selected products (SHIFT + MENU).
7
VOL -, VOL +: Increases (+) or decreases (-) the volume of the TV set; use to scroll horizontally in
any menu (SHIFT + VOL+/-).
8
/OK: Switches the TV sound off or confirms a selection (SHIFT +
9
Number keys 0 to 9: these keys have the same functions as those of your original remote and are
also used to enter the codes for different products.
10
AV: For selecting an external source (SCART).
11
B B : On/Standby.
12
F (FF) : fast forward for VCR
13
B (PLAY): plays a VCR tape or DVD disk; press with yellow key for fast text function in TV mode.
14
K (PAUSE): Suspends play and stops on an image; press with magenta key for fast text function in
TV mode.
15
I/EXIT: Teletext Off in TV mode; turns off the menu of the selected product (SHIFT + EXIT).
16
PROG+/-: Programmes zapping button (rapid select); use to scroll vertically through menus (SHIFT +
PROG+/-).
17
S/SHIFT: Programmes the remote control (S) or activates the secondary key features (SHIFT).
18
3: Press this key first before you type in the 2-digit channel number (except for Thomson group
products).
2 - Testing the remote control before you programme it
1. Turn on the product you want to control.
2. Press the product key (2) that corresponds to the type of product you want to
control:
TV: television set
VCR: video recorder
SAT: satellite receiver
3. Point the remote control towards the product and try to turn it off by pressing the
B B key. If the product doesn't turn off, you'll need to programme the remote control
by one of the methods described in chapter 3.
14:37
Page 1
1 - Description of the key functions
and DVD
; press with blue key for fast text function in TV mode.
S
S
DVD: DVD player
AUX: other product
1
and DVD
); press with red key for fast text
S
S
).
Tabla de contenido
loading

Resumen de contenidos para THOMSON ROC 56

  • Página 21: Descripción De Las Teclas

    El mando a distancia viene programado de fábrica para que pueda utilizarlo inmediatamente con la mayoría de los aparatos de las marcas del grupo Thomson. Por lo tanto, le aconsejamos que lo pruebe antes de intentar programarlo según alguno de los métodos indicados en este folleto.
  • Página 22: Programación Del Mando

    Ejemplo: si desea controlar un satélite mediante la tecla AUX , debe comenzar introduciendo el código de un satélite (cualquiera de los códigos de satélite que encontrará en la lista de códigos, por ejemplo: 603 si se trata de un satélite Thomson); a continuación, inicie el procedimiento de búsqueda automática.
  • Página 23 Ejemplo: si desea controlar un satélite mediante la tecla AUX , debe comenzar introduciendo el código de un satélite (cualquiera de los códigos de satélite que encontrará en la lista de códigos, por ejemplo: 603 si se trata de un satélite Thomson); a continuación, inicie el procedimiento de búsqueda automática.
  • Página 24 05-ROC 56 ES 24/02/04 14:40 Page 24 All manuals and user guides at all-guides.com Método E – Programación para controlar un COMBO (conjunto TV/VCR) La programación del mando a distancia para un COMBO consiste en programarlo una vez para el televisor y otra vez para el vídeo, es decir los dos aparatos que componen un COMBO.
  • Página 25: Control Del Volumen En El Modo Satélite Y Cable

    7 - La navegación NAVILIGHT El sistema de navegación THOMSON NAVILIGHT permite acceder con facilidad a los sistemas de ajuste de su televisor (TV) o de su vídeo (VCR) equipado con el sistema THOMSON NAVILIGHT.

Tabla de contenido