Orbegozo BV 6525 Manual De Instrucciones página 11

Batidora de vaso
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

BV 6525
3. Fill in the blender's jar with desired food.
4. Put the cover on top of the jar and fix it. Place the measuring cup on the center of cover,
anticlockwise rock the measuring cup slightly.
5. Put the blender glass jar onto the main body, and turn it slightly in a clockwise so it locks with the
motor base. And the machine was fully assembled.
6. Turning the knob to required speed (P—pulse, grade 1 to 5 means speed of blades from low to
high). Ensure to place the knob in 0 position when you stop using the blender.
7. During working mode, the blue light around the knob is on.
ASSEMBLY
Before you proceed, we need you to pay attention to the following notes:
- Before assembly or disassembly, switch off the appliance, remove the mains plug from the wall socket and
wait until the appliance has cooled down.
Mount the jar onto the appliance. Lock the jar by turning it clockwise.
• Mount the jar lid onto the jar
• Mount the jar lid insert into the jar lid
Lock the jar lid insert by turning it clockwise.
SWITCHING ON AND OFF
Before you proceed, we need you to pay attention to the following notes:
- Do not switch on the appliance when the jar is empty.
- Do not leave the appliance switched on continuously for more than two minutes.
• To switch on the appliance with continuous speed, set the power knob to the 1, 2, 3, 4 or 5 positions.
• To switch on the appliance in pulse mode, set the on/off switch to the 'P' position. Blender will work in this
mode while you keep the knob in this position, if you release the knob, it will return to position 0.
• To switch off the appliance, set the on/off switch to the '0' position.
HINTS FOR USE
Before you proceed, we need you to pay attention to the following notes:
- Do not overload the appliance. Do not put too many ingredients into the jar at one time.
• Cut the fruit and/or vegetables into pieces.
Make sure that the pieces of fruit and/or vegetables fit in the jar.
• Remove the jar lid from the jar.
• Put the pieces of fruit and/or vegetables into the jar.
• Assemble the appliance.
• Insert the mains plug into the wall socket.
• Switch on the appliance. The appliance chops the pieces of fruit and/or vegetables.
Turn the jar lid insert counterclockwise to remove the jar lid insert from the jar lid.
- If the pieces are too large for the filling opening of the jar lid, switch off the appliance, remove the jar lid,
and add the pieces of fruit and/or vegetables.
- Mount the jar lid onto the jar.
- Mount the jar lid insert into the jar lid.
- Switch on the appliance. The appliance chops the pieces of fruit and/or vegetables in a few seconds. The
longer the appliance is switched on, the finer the pieces of fruit and/or vegetables will be chopped.
After use, switch off the appliance, remove the mains plug from the wall socket and wait until the appliance
has cooled down.
11
Tabla de contenido
loading

Tabla de contenido