Bushnell NatureView Cam HD MAX Manual De Instrucciones página 28

It is not possible for the camera to focus on subjects at normal long ranges
when a close-up lens is in place-be sure to remove the close-up lens when
you again use the camera at normal ranges. Experimentation is recommended
to determine the best location of the camera for optimum results when using
the accessory close-up lenses. Set the "LED Control" parameter in the menu
to "Low" when using either close-up lens.
There are two ways to mount the NatureView Cam: using the provided
adjustable web belt, or the tripod socket.
1. Using the adjustable web belt: Fig. 5 illustrates using the web belt on
the NatureView Cam. Push one end of the belt through the two brackets
on the back of the NatureView Cam. Thread one plastic buckle part
onto each end of the belt. Fasten the belt securely around the tree trunk
by clicking the buckle ends together after tightening the belt so there is
no slack left.
2. Using the tripod socket: The camera is equipped with a socket at the
bottom end to enable mounting on a tripod or other mounting accessories
with a standard1/4-20 thread.
Fig. 5: Attaching the Belt
Two optional mounting accessories, a "Bear Safe" metal camera box (Model#
119654C) and Deluxe Tree Bracket (Model# 119652C) are also available-
please see your Bushnell dealer or website for more details.
Sensing Angle and Distance Test
To test whether the NatureView Cam can effectively monitor the area you
choose, this test is recommended to check the sensing angle and monitoring
distance of the NatureView Cam. To perform the test:
28