Safety Information; Preparation; Assembly Instructions - Pleasant Hearth GLF-5002-50 Instrucciones Importantes

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the
product. If you have any questions regarding the product, please call customer service at
1-877-447-4768, 8:30 a.m. - 4:30 p.m., CST, Monday - Friday.
Warning:
Do not install unit on shelves, raised platforms, beds, blankets, pillows etc.
Keep combustible materials such as furniture, bedding, papers, clothes and curtains at least
3 feet (914 mm) from the stove.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to as-
semble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 20 minutes
Tools Required for Assembly (not included): Phillips screwdriver

ASSEMBLY INSTRUCTIONS

Carefully remove all pieces from carton and make
sure that you have all parts listed (refer to parts list
on page 5). If you are missing parts, please call
customer service at 1-877-447-4768
NOTE: To avoid scratching the finish, assemble
the product on a soft, non-abrasive surface, such
as carpet or cardboard.
1. Attach a mounting bracket (AA) to the top
edge of the back of the mantel (A) by inserting
two screws (EE) through the mounting bracket
(AA) and into the pre-drilled holes in the mantel
(A). Tighten with a screwdriver.
CLEARANCE TO COMBUSTIBLES
2 27/64 (61.5 mm)
Sides
0 in. (0 mm)
Floor
20 in. (51 mm)
Top
36 in. (914 mm)
Front
0 in. (0 mm)
Rear
1 1
A
8
AA
EE
AA
EE