(YAS-103 only)
Problem
Cause
Cannot make the
BLUETOOTH is not selected as
the input source.
sound bar paired
with the
The device does not support
Bluetooth
A2DP.
device.
A
adaptor, etc. that you
want to pair with the sound bar
has a password other than
"0000".
The sound bar and device are too
far apart.
There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.
Another
device is
connected.
Cannot make a
Another
device is
Bluetooth
connected.
connection.
More than nine devices are paired
and the oldest pairing information
is deleted.
Remedy
Select BLUETOOTH as the input
source.
Perform pairing operations with a
device which supports A2DP.
Use a
adaptor, etc. whose
password is "0000".
Move the device closer to the sound
bar.
Move the sound bar away from the
device that is emitting radio frequency
signals.
Terminate current
connection, and perform pairing with
the new device.
The sound bar cannot make multiple
connections. Terminate
current
connection, and
make connection for the desired
device.
Perform pairing again. The sound bar
can retain pairing information for up to
eight devices. When pairing a ninth
device, the oldest pairing information
will be deleted.
No sound is
The
connection of the
sound bar with the device is
produced or the
disconnected.
sound is
interrupted
The sound bar and device are too
during playback.
far apart.
There is a device (microwave
oven, wireless LAN, etc.) outputs
signals in the 2.4 GHz frequency
band nearby.
The device's
off.
The device is not set to send
audio signals to the
sound bar.
Playback on the device has not
been performed.
The device's volume is set to
minimum.
Perform
connection
operations again (p.10).
Move the device closer to the sound
bar.
Move the sound bar away from the
device that is emitting radio frequency
signals.
function is
Activate the
function of the
device.
Check that the
function of
the device is set properly.
Perform playback on the device.
Turn up the volume level.
17