Connection To Input2; Connection To Input3; Connection To Input4 - Pioneer PDP-5004 Manual De Instrucciones

Connection to INPUT2

Connect an AV component with a digital video output
(digital set top box, DVD player, etc.) compatible with
HDCP (High-bandwidth Digital Content Protection). Before
attempting to connect one of these components, read its
operating instructions to make sure that it can be
connected.
AUDIO
INPUT2
R L
HDMI
AV component with a
digital video output
After connection is made, on-screen setup is necessary
to match the connected component. Please see page 23
to 24.
Notes
÷ Use a HDMI (High Definition Multimedia Interface) cable for
connection.
÷ When connecting a component with DVI connector, use an
DVI / HDMI conversion cable to make a connection.
÷ It is not a jack intended to be used with a personal computer.
÷ See appendix 1 (page 46) for information regarding signal and
display formats supported by INPUT2.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Installation and Connections

Connection to INPUT3

Connect an AV component that has S-video output jack to
S-VIDEO (INPUT3) jack.
INPUT3
S-VIDEO

Connection to INPUT4

Connect an AV component that has a video output jack to
INPUT4 jack. The VIDEO OUT (INPUT4) jack can be used
to output the video signal to a separate monitor, recording
device or other component with video input capability.
Note
A video signal will not be output from the VIDEO OUT (INPUT4)
jack when the main power of this display is off or in standby
mode.
INPUT4
VIDEO
IN OUT
AV component
To a monitor or a
recording device
AV component
15
EN