Orbegozo BV 9650 Manual De Instrucciones página 14

BV 9650
damage to blender. A rubber spatula may be used but
must be used only when blender is not running.
• Do not use a broken, chipped or cracked blender jar.
• Do not use broken, cracked or loose cutting blades.
• Cutting blades are sharp .Handle carefully.
• Always operate blender with cover in place.
• If the jar turns when the motor is switched ON, switch
OFF immediately and tighten jar assembly. Close
supervision is necessary when this appliance is used by or
taking off part and before cleaning.
• Do not use your fingers to press the food, always use the
plunger.
• Do not place blender filled with food or liquid in the
freezer. This will freeze and damage the blade assembly,
jar and motor.
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Place jar on blender base and wash the jar by following the directions in the CLEANING section. Wash
the lid, cap and tamper in warm soapy water. WARNING: use extreme caution when handling the jar, the
blades are very sharp.
4. Rinse, dry and reassemble.
5. Wipe the blender base with a damp cloth. Do not immerse the blender base in water or any other liquid.
Do not use harsh detergents or abrasive cleaners on any part of the appliance.
GENERAL USE
1. Place the blender on a clean, flat, dry and level surface.
2. NEVER run the blender when the jar is empty.
3. Add ingredients to jar and push the lid securely in place before positioning on blender base. Unless
instructed otherwise, load first with wet ingredients and then dry ingredients. Always add ice and larger,
harder ingredients last. Make sure that the cap is locked in position by turning it clockwise in the lid.
14