Control Panel Menu - Lincar Olga Serie Manual Del Usuario

CONTROL PANEL MENU

-Push on button P3 to have access to the menu
-Use buttons P5 and P6 to run on the different menu
-Push again on button P3 to enter into the displayed menu
-Use buttons P5 and P6 to run on the different submenu, the buttons P1 and P2 modify
the value shown on the display
-The button P3 accedes to the displayed menu/submenu
-The button P4 returns always to the previous menu
MENU DESCRIPTION
•
Menu 01 FAN REGULATION
•
Menu 02 SET WATCH (Setting the clock inside the equipment).
•
Menu 03 SET CHRONO (Set the schedules for automatic on / off).
•
Menu 04 CHOSE LANGUAGE (Set the language on the control panel).
•
Menu 05 STAND-BY (On/Off Stand-By)
•
Menu 06 SOUND (Setting the beep sound).
•
Menu 07 FIRST LOADING (Pellet loading in continuously).
•
Menu 08 STOVE STATUS (Displays the status of the appliance).
•
Menu 09 CORRECT PELLETS (Correction of carburetion of the appliance).
•
Menu 10 TECHNICAL CALIBRATIONS (Only for TECHNICAL STAFF).
This equipment is equipped with fans who convoy hot air into the rooms :
•
n. 1 (automatically regulated and cannot be excluded ) in the frontal part;
•
n. 2 into the canalization system.
MENU 01 (fan regulation)
This menu allows to set the function modality of the fan nr. 2 connected to the canalization
system. 3 different settings are possible, which will be displayed on the on the control panel: A
– The fan will adapt itself automatically to functioning power of the appliance.
0 – The fan will remain always off.
1---5 – The fan will function always at the selected speed.
On display appears also the indication of Ventilation3 : this is not to take into
consideration because it's not present and it's not available for this model.
MENU 02 (set clock)
With this Menu you can adjust the time and the date of the electronic card, the set date and
time will be utilized as reference for the activation of the switch ON/OFF programs
Pay ATTENTION to the regulation of the Time and Date, these regulations will influence the
on/off programs for the automatic lighting and turning off.
MENU 03 (set chrono)
Within this Menu you can set up the automatic cycles of switching ON/OFF you desire to
utilize. There are 3 different modalities you can use even contemporaneously, but pay attention
to not overlap the programs.
PROGRAM DAY. The programs inserted in this section will be repeated every day of the
week in the same way (max 2 ON/OFF cycles)
IT-GB-FR-ES mod. 501-501X-501L-501LX
52/124