Husqvarna TC 449 I.E 2012 Caracteristicas - Uso - Mantenimiento página 89

REAR BRAKE FLUID LEVEL CHECK
Fluid level inside master cylinder shall never be below
the min. level indicated on reservoir (1).
A decrease of the fluid level will let air into the system,
hence an extension of the lever stroke.
WARNING*: If the brake pedal feels
mushy when pulled, there may be air in
the brake lines or the brake may be de-
fective. Since it is dangerous to operate
the motorcycle under such conditions,
have the brake system immediately
checked by the Husqvarna Dealer.
1
CAUTION*: Do not spill brake fluid onto
any painted surface or light lens.
CAUTION*: Do not mix two brands of flu-
id. Completely change the brake fluid in
the brake system if you wish to switch
to another fluid brand.
CAUTION*: Brake fluid may cause irrita-
tion. Avoid contact with skin or eyes. In
case of contact, flush thoroughly with
water and call a doctor if your eyes
were exposed.
SPECIFICATIONS - OPERATION - MAINTENANCE
ADJUSTMENT OF THE HYDRAULIC CLUTCH CONTROL LEVER
Free play (A) shall be of at least 3 mm (0.118 in).
Lever (1) position on handlebar could be modified, based
on rider's hand size.
To decrease the lever distance from the handgrip, rotate
the adjuster (B) CLOCKWISE.
To increase the lever distance from the handgrip, rotate
the adjuster (B) COUNTER CLOCKWISE.
1
A
B
EN - 35