Functional Description; Commissioning; Battery Pack - Festool T18+3 Manual De Instrucciones

English
Cordless drill
Adjustable torque**
Chuck clamping range
Max. drill diameter
Tool holder in drill spindle
Weight (incl. battery pack BP 18 Li 6,2 AS and chuck) as per EPTA procedure
01:2014
Weight with Centrotec, without battery pack.
* Speed specifications with fully charged bat­
tery pack.
** The maximum speed is reduced in the lower
torque stages (values in clockwise rotation).
5

Functional description

[1-1] Buttons for releasing the battery pack
[1-2]
Capacity display button on battery
pack
[1-3] Capacity indicator
[1-4]
Bit store
[1-5] On/off switch
[1-6]
Rotational direction switch
[1-7] LED light
[1-8]
Gear switch
[1-9] Drilling symbol
[1-10] Screwdriving symbol
[1-11] Screwdriving/drilling selector switch
[1-12] Torque thumbwheel
[1-13] Belt clip
[1-14] Insulated gripping surfaces (grey
shaded area)
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin­
ning of the Operating Instructions.
6

Commissioning

6.1
Belt clip
The belt clip allows a shot-term securing of the
device in the work clothes. Insert the belt clip
on the designated side, right or left, and fix it
with the screw [1a].
14
6.2 Switching on/off [1-5]
Press = ON, release = OFF
The speed can be infinitely adjusted, rela­
tive to the pressure applied to the on/off
switch.
The LED light [1-7] lights up when the on/off
switch [1-5] is pressed.
7

Battery pack

7.1 Changing the battery pack
Inserting the battery pack [2a]
Removing the battery pack [2b]
The battery pack is ready to use straight out of
the box and can be charged at any time.
7.2 Capacity indicator
The capacity display [1-3] indicates the charge
of the battery pack for approx. 2 seconds after
the button [1-2] is pressed:
Recommendation: Charge the battery pack
*
before any further use.
Further information about the battery pack
and charger can be found in the corre­
sponding operating manual.
T18+3
1st gear 0.8 - 8 Nm
2nd gear 0.5 - 6 Nm
1.5 - 13 mm
Wood 45 mm
Metal 13 mm
1/4''
2 kg
1.0 kg
70–100%
40–70%
15–40%
< 15%
*