Troubleshooting - DeWalt DWV009 Manual De Instrucciones

Troubleshooting

PROBLEM SOLUTION
Motor does not run Check power cord, plugs and outlet.
Ensure the on/off switch is in the ON
position ( ).
Suction capacity Remove blockages in the suction nozzle,
decreases
suction tube, suction hose or filter.
Replace the paper or fleece bag.
Check for proper installation of the filter.
Clean or replace the filter.
Empty canister, refer to Empty Canister
under Operation.
Vacuum stops running Thermal overload has been tripped:
1. Turn the vacuum off and disconnect
vacuum cleaner from power source.
2. Empty the canister, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an appropriate
outlet and turn on/off switch to the ON
position ( ) to test.
Dust comes out while Check for proper installation of the filter.
vacuuming.
Ensure filter is not damaged; replace if
necessary.
Ensure filter seal is in place and is secure.
Power tool does not Ensure tool is plugged into the tool outlet
turn on. on the dust extractor.
Ensure the on/off switch is in the ON
position ( ).
SPECIFICATIONS
AR B2
Volts 220V 220V
Hertz 50hz 50-60Hz 50-60Hz 50-60Hz
LwA — 92.5dB(A)
LpA — 79.2dB(A)
ah — 0.167m/s
Max. Watts
2110W 2110W
Out
Nominal Motor
Current
Capacity
Weight
Insulation
Class
IP#
33
B2 B3 BR
220V 120V 127V
60Hz
— — 92.7dB(A)
— — 79.4dB(A)
2 2
— — 0.173m/s
2110W 480W 480W
1400 W
8 gallon (30.2 liters)
22 lbs. (9.9 kg)
Class 1
IP44