Olimpia splendid PELER 4D Instrucciones Para La Instalación, Uso Y Mantenimiento página 38

14. Do not disconnect the power plug during functioning.
Fire or electrical shocks hazard.
15. Do not place heavy or hot objects on top of the appliance.
16. Before electrically connecting the appliance, make sure the plate
data correspond to those of the distribution network. The plate
(23) is located on the sides of the appliance (Fig.C).
17. Install the appliance according to the manufacturer's instruc-
tions. An incorrect installation can cause damage to people, ani-
mals or property for which the manufacturer accepts no respon-
sibility.
18. If the appliance's plug is incompatible with the socket, have the
socket replaced with a suitable one by a qualified technician,
who must ascertain that the section of the socket cables is com-
patible with the power absorbed by the appliance. We do not rec-
ommend using adaptors and/or extension cables. If they cannot
be avoided, however, they must comply with current safety reg-
ulations and their ampacity (A) must not be below the maximum
ampacity of the appliance.
19. This appliance is not intended to be run via an external timer or
with a separate remote control system.
20. Always and only use the appliance in a vertical position.
21. Do not obstruct the air inlet and outlet grids in any manner.
22. Do not insert extraneous items in the air inlet and outlet grids as
this will create the risk of electrical shocks, fire or damages to
the appliance.
23. Do not use the appliance:
- with wet or damp hands;
- barefoot.
24. Do not pull the power cable or the appliance itself to remove the
plug from the socket.
EN - 5