Replacing The Camber Tube - Ki Mobility Rogue XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
K. Replacing the Camber Tube
1. To uninstall the camber tube on your Rogue XP wheelchair:
a. Remove rear wheels.
b. Using two 4mm hex (Allen) wrenches, remove 6mm button head screw (Fig. 15:D).
c. Gently press threaded barrel with remaining button head screw (Fig. 15:E) through camber
tube using hex (Allen) wrench.
d. Using a 4mm hex wrench and a 8mm wrench, loosen 5mm socket head screw (Fig. 15:A)
to release clamp.
e. Using a 2.5mm hex wrench, loosen set screws (Fig. 15:B).
f. Slide camber adapter (Fig. 15:G) from end of camber tube (Fig. 15:C)
g. Repeat steps b – f on other side.
h. Slide camber tube to left or right to remove from camber tube clamps. If you have a 5th
wheel receiver it needs to be removed from the camber tube before removing the camber
tube.
E
D
Fig. 15
C
A
B
26
G