Data Plate - Dometic CS 110 Manual Del Usuario

introduction
Thank you for choosing the Dometic Wine cellar.
Please read the following instructions carefully be-
fore installing your new wine cellar. We trust you
will be completely satisfied with your purchase.
The wine cellar must be installed and used accord-
ing to these instructions in order for it to operate
correctly and economically.
The appliance is not intended for use by young
children or infirm persons without supervision.
Young children should be supervised to ensure that
they do not play with the appliance.
transit daMagE
Inspect the wine cellar for transit damage. You
must report any damage the company responsible
for the delivery within the legal or stated time for
this type of product. If there is no such established
report time, the damage must be reported within
seven days of delivery.
accEssoriEs
Please check that the following accessories are at-
tached to the Wine cellar or in the separate card-
board box inside the wine cellar.
DISTANcE BAR
(Ensures distance
to wall.)
Cardboard box:
• Handle
• Storage shelves
• Support (floor)
• Shelf supports
• Screws
• Washers (wooden door)
• Keys
• cD
• Instruction manual
Necessary additional tools not included:
• Screwdriver (star quad)
• Adjustable spanner or fixed spanner (21 mm)
EN

data platE

check the data plate, inside the wine cellar at
the top left, to ensure you have received the right
model.
The data plate shows de-
tails that you will need to
quote if you have to contact
service personnel.
It is a good idea to make a note of them here:
Model designation . . . . . . . . . . . . . . . . . . . . . . . .
Product number . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial number . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appliances bearing this symbol must
be deposited at the designated local
reception point for the disposal of
electrical and electronic equipment.
It is not permitted that this product
be disposed of by way of the normal
household refuse collection system.
installation
Please follow these instructions:
• For best performance, air needs to circulate free-
ly over the cooling unit behind the wine cellar.
• The free-standing design of the cellar means that
it should stand at least 25 mm from the rear and
side walls.
• Allow a clearance of at least 100 mm above the
wine cellar.
Distance
bar
• Note that it must be possible to open the wine
cellar door at least 90° to allow the sliding
shelves to be pulled out.
- 7 -
Distance
Wall
bar
25 mm
Rear
25 mm
Wall
30 mm