NEC MultiSync FP950 Manual Del Usuario página 19

• If the monitor has been dropped or the cabinet damaged.
• If the monitor does not operate normally by following operating
instructions.
• Allow adequate ventilation around the monitor so that
• The power cable connector is the primary means of
CAUTION
• Handle with care when transporting. Save packaging
CORRECT PLACEMENT AND ADJUSTMENT OF THE
MONITOR CAN REDUCE EYE, SHOULDER AND NECK
FATIGUE. CHECK THE FOLLOWING WHEN YOU
• Adjust the monitor height so that the
top of the screen is at or slightly
below eye level. Your eyes should
look slightly downward when
viewing the middle of the screen.
• Position your monitor no closer than
40 cm and no further away than
70 cm from your eyes. The optimal
distance is 60 cm.
• Rest your eyes periodically by
focusing on an object at least 6 m
away. Blink often.
• Position the monitor at a 90° angle
to windows and other light sources to minimize glare and reflections.
Adjust the monitor tilt so that ceiling lights do not reflect on your screen.
• If reflected light makes it hard for you to see your screen, use an
anti-glare filter.
• Clean your monitor regularly. Use a lint-free, non-abrasive cloth and a
non-alcohol, neutral, non-abrasive cleaning solution or glass cleaner to
minimize dust.
• Adjust the monitor's brightness and contrast controls to enhance
readability.
heat can properly dissipate. Do not block ventilated
openings or place the monitor near a radiator or other
heat sources. Do not put anything on top of monitor.
detaching the system from the power supply. The
monitor should be installed close to a power outlet
which is easily accessible.
for transporting.
POSITION THE MONITOR:
E - 11