Recommended Cutting Equipment; Filing Equipment And Filing Angles - Husqvarna 435 II Manual De Instrucciones

Recommended cutting equipment

Chain saw model(s) Husqvarna 435 II, 435e II, 440 II, 440e II has been evaluated for safety according to EN-ISO 11681-
1 (Machinery for forestry - Portable chain saw safety requirements and testing) and fulfills the safety requirements when
equipped with the below listed guide bar and saw chain combination(s).
We recommend only to use the listed guide bar and saw chain combination(s).
Low kickback saw chain
A saw chain that is designated as Low kickback has been evaluated according to ANSI B175.1-2012 and passed the criteria to be listed as a Low kickback saw chain.
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is defined by the number of teeth (e.g. 10T). For solid bars the nose radius is
defined by the size of the nose radius. For a given guide bar length, you may use a guide bar with smaller nose radius
than listed.
Guide bar
Length, inch Pitch, inch
13
15
0,325
16
18
Pixel
Pixel is a guide bar and saw chain combination that is more light weight and designed to offer more energy efficient use
by cutting narrow cuts. Both guide bar and saw chain need to be Pixel to get these benefits. Pixel cutting equipment is
marked with this symbol.
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct filing angles. We recommend always using a Husqvarna file gauge
to restore the sharpness of the saw chain. The part numbers are given in the table below.
If you are not sure of how to identify what saw chain you have on your chain saw, please visit www.husqvarna.com for
more information.
Husqvarna
Husqvarna
32 – English
TECHNICAL DATA
Gauge, mm Max. nose radius
1,3 10T
Saw chain
Length, drive links
Type
(no.)
56
Husqvarna H30
64
66
Husqvarna SP33G
72
1158413-39 Rev.1 2016-09-05