Application Options; Automatic Switch-Off; Cleaning, Storage; Technical Specifications - Bosch PFP1036 Instrucciones De Uso

Congratulations on the purchase of this
appliance from BOSCH. You have purchased a
high-quality product which will give you a great
deal of pleasure.
Parts and controls
Fig. 1
1 Heating pad
2 Fabric cover
3 Thermostat
4 Indicator light
5 Cable Velcro strip

Application options

The heating pad is designed for use
on the following body parts: arms, legs,
stomach, shoulder, thigh, calf, etc.
Switching on the appliance
Put the heating pad (N) in the fabric cover

(O). Ensure that the power cord and
thermostat (P) are situated outside
the cover (O).
Close the Velcro fastener or zip.
Set the required temperature

on the thermostat (P).
Important:
For continuous operation it is recommended
to position the thermostat on the first setting.
Fig. 2
When the temperature is set on the thermos-
tat (P), the heating pad switches on and the
indicator light (Q) comes on.
Fig. 3
If the thermostat (P) is set to position "0",
the heating pad switches off and the indicator
light (Q) goes out.
Risk of burns
When using the heating pad,
ensure that a little air can circulate
between the heating pad and skin.
Never use the heating pad without
its fabric cover.
Robert Bosch Hausgeräte GmbH

Automatic switch-off

To prevent unsupervised operation,
the heating pad automatically switches
off after approx. 90 minutes continuous
operation.
The indicator light comes on again.
To switch on the heating pad again, first set
the thermostat to "0" and then to the required
temperature.
After use, pull out the mains plug.


Cleaning, storage

Electric shock risk
Before cleaning and storing the
appliance, pull out the mains plug
and leave the appliance to cool
down!
The fabric cover is machine-washable,

see the attached care symbols.
Before washing the cover, always
remove the heating pad.
The heating pad must not be washed

in the washing machine or dry-cleaned.
The thermostat must not become wet.

Never hold under water.
Moisture damages the thermostat.
When drying the appliance, arrange

the cable in such a way that water
cannot run into the thermostat.
Do not use detergents or solvents.

These may damage the appliance.
When storing the appliance, allow it to

cool down before folding. Store the
heating pad in a dry location.
Important!
To prevent creasing the heating pad,
do not place any objects on it.
Tie up the power cord with the cable

Velcro strip.

Technical specifications

Voltage
Power
Frequency
en
220–240 V~
60 W
50 Hz
9