Prepare To Install The Oven - GE JGRS14 Instructions De Instalacion

Horno a gas empotrado de 24”
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

PREPARE TO INSTALL THE OVEN

TOOLS YOU WILL NEED
Drill with 1/8" Bit
Adjustable Wrench
Pipe Wrench
3/16" Hex Socket
Driver
#1 or #2
Phillips Screwdriver
MATERIALS YOU MAY NEED
Gas line
shut-off valve
Pipe joint sealant
FOR FLEXIBLE CONNECTION WHERE
LOCAL CODES PERMIT:
• Coated and approved flexible metal tubing
(same 3/4" or 1/2" I.D. as gas supply line)
• Adaptor or connector
FOR RIGID CONNECTION:
• Pipe fittings or union as required
Installation Instructions
Safety Glasses
Ruler or Straightedge
Pencil
12" Spirit Level
Hand or Saber Saw
1/2" pipe nipple
GAS REQUIREMENTS
1
You must follow local codes when installing
your built-in oven. Check with your local
utilities for codes and ordinances that apply
in your area. If there are no local codes, you
must follow the National Fuel Gas Code
ANSI/Z223.1 – Latest Edition. To get a copy
write to:
American Gas Association
1515 Wilson Boulevard
Arlington (Rosslyn), VA 22209
This standard does not cover the thermal
efficiency of household cooking gas
appliances since it is regulated by the
Energy Policy and Conservation Act of 1975,
the National Energy Conservation Policy Act
of 1978 and the National Appliance Energy
Conservation Act of 1987.
If the oven is to be installed in a mobile
home, the installation must conform to the
Manufactured Home Construction and
Safety Standard, Title 24, CFR, Part 3280 or,
when not applicable, the Standard for
Manufactured Home Installations ANSI/
A225.1 – Latest Edition and Manufactured
Home Installations, Sites, and Communities
ANSI/NFPA 501A, or with local codes. You
can get a copy of the Federal Standard by
writing:
Office of Mobile Home Standards
HUD Building
451 7th Street, S.W.
Washington, D.C. 24010
ELECTRICAL REQUIREMENTS
2
This appliance must be electrically
grounded. Check with your local codes
which apply in your area. If no local
codes apply, the National Electrical Code,
ANSI/NFPA No. 70 – Latest Edition must
be followed. Write to:
NATIONAL FIRE PROTECTION
ASSOCIATION
BATTERYMARCH PARK
QUINCY, MA 02269
2
Tabla de contenido
loading

Tabla de contenido