STOK QUATTRO SGP4032N Manual Del Usuario página 17

 Remove cap from LP gas cylinder.
 Hold the regulator firmly and insert nipple into the gas
cylinder valve.
NOTE: Nipple must be centered in the cylinder valve.
 Holding coupling nut and regulator as shown, turn cou-
pling nut clockwise and tighten by hand taking care not
to cross-thread the connection. Do not use tools.
NOTE: The regulator will seal in the cylinder valve result-
ing in some resistance. An additional one-half to three-
quarters turn is required to complete the connection.
If you cannot complete the connection, disconnect and
repeat the above two steps. If you still cannot complete
the connection, DO NOT use this regulator!
 Inspect valve connections port and regulator. Look for any
damage or debris. Remove any debris. Inspect hose for
damage. Never attempt to use damaged or plugged
equipment. See your local LP Gas Dealer for repairs.
Fig. 21
ASSEMBLY
HANDWHEEL
CYLINDER
VALVE
PLASTIC
STRAP AND
CAP
CYLINDER
VALVE
Fig. 22
Fig. 23
17
REGULATOR
NIPPLE
CYLINDER
VALVE
COUPLING
NUT
REGULATOR