Accessories; Standard Accessories - Metabo HPT G 12SR4 Manual De Instrucciones

NOTE
When work has been fi nished, blow air containing no
moisture from the tail cover air hole with the use of an
air gun, etc., while running the motor without any load
applied. This is eff ective in removing any dirt and dust
that has accumulated. Dirt and dust collecting inside
the motor may result in malfunctions.
8. Service parts list
CAUTION
Repair, modifi cation and inspection of metabo HPT
Power Tools must be carried out by a metabo HPT
Authorized Service Center.
This Parts List will be helpful if presented
with the tool to the metabo HPT Authorized
Service Center when requesting repair or other
maintenance.
In the operation and maintenance of power
tools, the safety regulations and standards
prescribed in each country must be observed.
WARNING
Never use any accessories other than those mentioned below.
The use of any accessories other than those mentioned below or attachments not intended for use
such as cup wheel, cut-off wheel or saw blade is dangerous and may cause personal injury or property
damage.
NOTE
Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

Depressed center wheel (Code No. 316821)............1
4-1/2" (115 mm) external dia. × 1/4" (6 mm)
thickness × 7/8" (22.23 mm) hole dia.
Wrench (Code No. 938332Z) ...................................1
Side Handle (Code No. 318312)...............................1
NOTE
Specifications are subject to change without any
obligation on the part of the metabo HPT.
MODIFICATIONS
metabo HPT Power Tools are constantly being
improved and modified to incorporate the latest
technological advancements.
Accordingly, some parts may be changed without
prior notice.

ACCESSORIES

English
13