Using The Mini S Bl Ade In The Small Workbowl - Black+Decker FP6010-AR Manual De Instrucciones

Note: The blade attachments are very sharp . Use caution when handling and
storing .
4 . Place food in workbowl .
5 . Place lid on workbowl and lock into place by rotating lid
counterclockwise .
6 . Make sure food pushers are securely in place in feed chute . Never use
your fingers to direct food through chute .
7 . Press speed button to process .
8 . To add food or liquid while processor is running, remove food pusher
and insert through the feed chute . Replace food pusher in chute .
9 . When finished, press the PULSE|OFF button and allow blades to stop revolving
before removing lid . Twist lid clockwise to remove from the workbowl .
Important: Be sure S blade has completely stopped spinning and unplug
appliance before removing lid from processor .
10 . To unlock workbowl, turn it clockwise and lift off base .
11 . Carefully remove S blade by pulling shaft straight
up and empty workbowl .
Note: To remove S Blade from blade shaft, turn
counterclockwise and pull blade shaft out
from bottom . (P)
12 . Unplug appliance when not in use .
U SIN G TH E MI N I S B LA D E I N
THE SMA LL WOR K BOWL
1 . Lock large workbowl into position on food
processor base .
2 . Place small workbowl in large workbowl, fitting
the tabs on the outside of the small bowl into the
notches on the large workbowl . This will hold the
small bowl firmly in place . (Q)
3 . Carefully place the mini S blade on blade shaft in bottom of workbowl .
4 . Place lid on workbowl and lock into place by rotating lid
counterclockwise .
5 . Follow remaining steps as outlined in USING THE S BLADE IN THE
LARGE WORKBOWL .
Important: Disks and blades must be removed before removing small
workbowl .
6 . To remove small workbowl from large workbowl, use the two finger
grips to lift up .
35
P
Q