Using The Feed Chute And Pusher; Using The Power Dial - Black+Decker MultiPREP Slice 'N Dice SL3000 Manual De Instrucciones

4. After selecting the disc you wish to use, place
the appropriate shaft on the center coupling in
the bottom of the processing basin (instructions
for individual discs follow in this manual) then
attach the appropriate disc.
5. Place the lid with feed chute on top of the
processing basin, aligning the tabs and locking
it into place by turning counterclockwise. The lid
is locked when it clicks firmly into place. The lid
will always, and only, lock when the feed chute is
aligned opposite the continuous flow chute. (B)
Note: Be sure to lock the processing basin in place before attaching the
shafts, discs, or lid.
6. Insert the food pusher into the feed chute of the
lid. (C)
7. Plug in the appliance. If the appliance is properly
assembled, the appliance will turn on when the
power dial is turned clockwise. If it does not turn
on, the interlocks are not properly engaged.
Important: For your protection this appliance has
an interlock system. The appliance will not operate
unless the processing basin and lid are properly
locked in place.
USING TH E F E E D C HUT E AND P USHER
Note: Before operating the appliance, be sure the processing basin, discs and
lid are properly assembled on the appliance base.
1. Place food to be processed in the feed chute. Use the food pusher to guide
food through the feed chute.
USING TH E P OW E R DI AL
Note: If the appliance does not operate, make sure the processing basin and
lid are properly locked on the base. There is an automatic safety lock that
causes the appliance to stop working if the processing basin and/or lid are
not properly locked in place.
The one-speed power dial is located on the front of the
appliance base.
1. Make sure the power dial is in the O (OFF) position.
2. Plug in the appliance to turn it on.
3. Turn the power dial clockwise to I (ON) position. (D)
4. To stop, turn the power dial counterclockwise to
O (OFF) position.
5. Always unplug the appliance when not in use.
B
C
D
7