Select an additional rinse
Centrifug.
Temp.
This appliance is designed for saving
water. However, for people with a very
delicate skin (allergic to detergents) it
may be necessary to rinse the laundry
using an extra quantity of water (extra
rinse)
Press simultaneously the Automatic
Dry
and Delay Start (Inicio
diferido) buttons for some seconds:
the Extra rinse
the display.
This function stays permanently on. To
remove it press the Automatic Dry
and Delay Start (Inicio diferido)
buttons again until the Extra rinse
icon disappears.
Display
The display shows the following
information:
Duration of the selected programme
After selecting a programme, the
duration is displayed in hours and
minutes (for example 2.05).
The duration is calculated automatically
on the basis of the maximum
recommended load for each type of
fabric.
After the programme has started, the
time remaining is updated every minute.
Inicio
diferido
icon will appear on
Selected drying time
After selecting a drying programme, the
drying time is displayed in minutes or in
hours and minutes (max
After the programme has started the
time remaining is updated every
minute.
Washing/Drying programme phase
icons
By selecting the programme, the
washing and/or drying programme
phase icons corresponding to the
various phases making up the
programme are shown in the upper part
of the display.
After you have pressed the Start/Pause
button and the machine has started,
only the phase running icon stays on.
When the programme has finished, 3
0.00
flashing zeros «
display.
Delay
The selected delay (20 hours max) set
by means of the relevant button appears
on the display for about 3 seconds, then
the duration of the previously selected
programme is displayed. The relevant
phase icon
is lighted-on.
use electrolux 15
130
mins).
» appear on the