Power connection diagram (Argentine
models only)
Make sure your car's auxiliary power connector, and
match the connections of cords correctly
depending on the car.
Auxiliary power connector
Common connection
Red
Yellow
continuous power
12
supply
15
switched power supply
When the positions of the red and yellow
leads are inverted
Red
Yellow
12
switched power supply
continuous power
15
supply
When the car without ACC position
Red
Yellow
After matching the connections and switching
power supply leads correctly, connect the unit to
the car's power supply. If you have any questions
and problems connecting your unit that are not
covered in this manual, consult the car dealer.
18
GB
Red
Yellow
Yellow
Red
Red
Yellow
Yellow
Red
Red
Yellow
Installation
Removing the protection collar and the
bracket
Before installing the unit, remove the protection
collar and the bracket from the unit.
1
Pinch both edges of the protection collar
, then pull it out.
2
Insert both release keys until they
click, and pull down the bracket , then
pull up the unit to separate.
Face the hook inwards.
Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket are bent inwards 2 mm (
in). When mounting in a Japanese car, see
"Mounting the unit in a Japanese car" (page 19).
1
Position the bracket inside the
dashboard, then bend the claws outward
for a tight fit.
182 mm (7
1
/
53 mm (2
1
/
in)
8
Catch
3
/
32
in)
4