Check to make sure that all these parts were included in your packaging:
Valve Bodies (1 Hot, 1 Cold)
Handshower Base Fitting
For safe operation of the valve, please observe the following:
Recommended Operating pressure:
Minimum Pressure........20 psi (0.14 MPa), dynamic
Maximum Pressure.......80 psi (0.55 MPa), static
The hot water supply pressure should not exceed 185˚F (85˚C).
Do not use steam for the hot water supply.
Do not use the product at an ambient temperature below 32°F (0°C).
Your new valve is designed for years of trouble-free performance. Keep it looking
new by cleaning it periodically with mild soap, rinsing thoroughly with warm water
and drying with a clean, soft cloth. Do not use abrasive cleaners, steel wool or harsh
chemicals, as these will dull the finish. Failure to follow these instructions may void
your warranty.
INCLUDED PARTS
Spout Base Fitting
WARNINGS
CARE & CLEANING
3
Hoses (3)
Hot, Cold & Handshower
Thin Tub Installation Kit
(4 sets)