Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4.2 Safety Procedures and Notes before Switching Machine ON
Carefully read ALL INSTRUCTIONS of this manual before turning the machine
ON. Be sure to be familiar with the instructions and that you have well
understood all information contained in this manual.
If you have any question, contact your supervisor
or your nearest Dealer.
4.2.1 Danger
An electric cable or electric wire with damaged jacket or bad insulation could cause
electrical shocks as well as electrical leak. Before using the equipment, check conditions of
all wires and cables.
4.2.2 Advices
Be sure ALL INSTRUCTIONS in this manual have been thoroughly understood.
Every function and operational procedure has to be very clear to the operator.
Any manual command (switch, button or lever) shall be given only after being sure it
is the correct one.
4.2.3 Precautions
The electric cable has to be compatible with the power required by the machine.
Cables touching the floor or close to the machine, need to be protected against
short circuits.
4.3 Routine Inspection
4.3.1 Advice
When checking the tension of the belts or chains, DO NOT introduce your fingers
between the belts and the pulleys and nor between the chain and the gears.
4.3.2 Precautions
Check the motor and turning or sliding parts of the machine, in case of abnormal
noises.
Check the tension of the belts and chains and replace the set when belt, chain or
gears show signs of being worn out.
When checking tension of belts or chain, DO NOT introduce your fingers between
belts and pulleys, nor between the chains and gears.
Check protections and safety devices to make sure they are working properly.
4.4 Operation
4.4.1 Warning
Do not operate the machine with long hair, which might touch any part of the
machine, because it may lead to serious accidents. Tie your hair up well and/or cover your
hair with a scarf.
Only trained or skilled personnel shall operate this machine. NEVER operate
machine without all original safety devices in perfect condition.
IMPORTANT
09
This product will be replaced or repaired under warrant y, for a period of (1) year,
beginning from the date of purchase by the original purchaser/user ("End User"), or
eighteen (18) months from the da te of shipment from SKYFOOD's ware house,
whichever expires first.
Accessories wil l be re placed o r repaired under wa rranty, for a period of (30) days,
beginning from the da te of purcha se by th e original purchaser/user ("En d User"), or
eighteen (18) months from the date of shipment from SKYFOOD's wa rehouse, whichever
expire s first.
This warranty shall not take effect until a properly completed and executed WARRANTY
REGISTRATION form has been received by SKYFOOD EQUIP MENT, LLC, within thirty
(30) days from the da te of purch ase. The WARRANTY REGISTRATION is available either
in the Instruction Manual of every Product or at SKYFOOD's website www.skyfood .us. The
End User must fill out the WARRANTY REGISTRATION form and send it to SK YFOOD
according to the instructions p osted on the referred website. Failure to do so will VOID
the warranty.
No extended warranties for third party products. There are no other express
warranties or conditions othe r than the one offered by each manufacturer for
products sold by SKYFOOD, not under the FLEETWOOD by SKYMSEN and
SKY MSEN brand.
For questions or assistance, do not return the p roduct or accessories to the store, please
call Toll Free 1-800-503-7534, or visit the Customer Service section at www.skyfood.us.
For faster service please have th e items name , serial number, and proof of purchase for
the operator to assist you.
SKY FOOD reserve s the right to change the term s of its limited warranty at any time
without any prior notice. It also reserves the right to change the design and
specifications of its equipment or any related documentation at any time. The e nd
user is not entitled to upgrades or refunds resulting from these changes.
Updates
These Terms and Conditions were last updated on January 14
th
, 2014.
Capítulos
Tabla de contenido
