Bosch GTA3800 Instrucciones De Funcionamiento Y Seguridad página 12

BM 2610027815 03-13_BM 2610027815 03-13.qxp 4/2/13 8:48 AM Page 12
Wo Rk HEIGHT SUppo RT ADj USTMENT
1. Loosen the locking knob located at the end
of the expansion rail, as shown in figure N,
and raise the work height support so it is
level with the table top of the attached
miter saw.
2. Retighten knob and repeat on opposite
side.
REpETITIv E STo p ADj USTMENT
To raise the repetitive stop: Lift up and in
place as shown in figure O.
To stow: Push the repetitive stop in toward
the rail assembly and down.
Repeat on opposite side.
USING THE EXTENSIo N RAILS
See Figure P.
Use the extension rails when working with
larger workpieces.
To extend the rails:
1. Loosen the extension adjustment knob.
2. Extend the rail to the desired position.
3. Tighten the extension adjustment knob.
FIG. P
FIG. N
-12-
LOCK
KNOB
FIG. O
EXTENSION
DJUSTMENT
KNOB