Ryobi RY40701 Manual Del Operador página 15

CLEANING THE HOLE AUGER
 Remove the battery pack.
 Remove the auger bit from the drive shaft by unlocking
the quick release pin.
 Store the locking pin in the auger when not in use.
 Clean dirt and debris from the auger bit, using a damp
cloth with a mild detergent.
WARNING:
Remove the auger bit from the digging tool before
cleaning with water. Do not wet the motor housing.
NOTE: Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils such as pine and lemon, and by solvents
such as kerosene.
 Moisture can cause a shock hazard. Wipe off any moisture
with a soft dry cloth.
This product has a Five-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
MAINTENANCE
For any questions about operating or maintaining your product,
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
or call (toll free) 1-800-525-2579.
11 — English
 Use a small brush or the air discharge of a small vacuum
cleaner brush to clear dust or debris from the air vents
on the motor housing.
TRANSPORTING AND STORING
 Remove the battery pack.
 Stop the product, and allow it to cool down before storing
or transporting.
 Remove the auger bit from the drive shaft by unlocking
the locking pin.
NOTE: Store the locking pin in the auger when not in use.
 For transportation, secure the product against movement
or falling to prevent injury to persons or damage to the
product.
 Clean the hole auger thoroughly before storing.
 Store the hole auger in a dry, well-ventilated place that
is inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts. Do
not store outdoors.
CALL US FIRST
call the RYOBI Help Line!