Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator
the element display and the timer display shows
10 seconds. The
indicator in the element display
x
stays on.
Touch the TIMER key, to turn the indicators and the beep
off.
Notes
To set a cooking time of under 10 minutes, always
▯
touch 0 before you select the required value.
If a cooking time was set for several elements, the time
▯
information for the selected element is shown in the
timer display.
Select the relevant element to call up the remaining
▯
cooking time.
You can set a cooking time of up to
▯
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Select the desired element. Touch the TIMER key. Adjust
the cook time using the number keys, or deactivate it by
setting the timer value to
Kitchen timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
Touch the TIMER key until the
1.
‹‹
appears on the timer display.
Set the desired time using the number keys. min
2.
appears on the timer display.
The timer start to count down after a few seconds.
Changing or deleting the time
Touch the TIMER key repeatedly until the
lights up.
Change the time using number keys, or set
to delete the programmed time.
When the time has elapsed
A beep sounds.
appears on the timer display and the
‹‹
V
indicator lights up. The displays go out after
10 seconds.
Touch any key to turn off the indicators and the beep.
14
appears in
‹
‹‹
minutes.
ŠŠ
.
‹
indicator lights up.
V
indicator
V
in order
‹‹
Child lock
You can use the child lock to prevent children from
accidentally turning the cooktop on.
for
Turning the child lock on
The cooktop must be turned off.
Touch LOCK for 4 seconds. The
several seconds. The cooktop is now locked.
Turning the child lock off
Touch LOCK for 4 seconds. The cooktop is now
unlocked.
CAUTION
9
The child lock may be accidentally turned on and off
due to:
water spilled during cleaning
▯
food that has overflowed
▯
objects being placed on the LOCK touch key.
▯
Automatic child lock
With this function, the child lock is automatically activated
whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.
Wipe Protection
Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
To activate:
Touch the LOCK key. The
lights up. The control panel is locked for 35 seconds.
You can now clean the surface of the control panel
without risk of changing the settings.
To deactivate:
To deactivate the function before the time has elapsed,
touch the LOCK key. The
off, the function is deactivated.
Notes
An acoustic signal sounds 30 seconds after activation.
▯
This indicates that the function is about to finish.
The wipe protection lock does not lock the main
▯
switch. The cooktop can be switched off at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
indicator
/
flash alternately in the display.
•
œ
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
indicator lights up for
Ú
indicator above the key
Ú
indicator above the key turns
Ú
and the residual heat
"‰