Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell MS 55 Manual De Instrucciones Original

2.3 Technical data

Universal motor, radio and TV
interference suppressed
Power input (nominal load)
Current at nominal load
Saw blade speed during idling
Saw blade speed at normal load
Cutting depth 0°/30°/45°
Swivelling saw unit
Saw blade diameter max/min
Largest thickness basic saw blade body
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight without mains cable
Dimensions (W x L x H)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Idling
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Portable circular saw MS 55 complete with:
1 carbide-tipped circular saw blade Ø 160 mm ( 6 ¼ in. ), 16 teeth
1 riving knife / splitter (thickness 1.2 mm / 3/64 in.)
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety Instructions"
Sound power level
103 dB (A)
104 dB (A)
2 .
230 V~, 50 Hz
1100 W
4.8 W
4400 rpm
2770 rpm
55/50/42 mm ( 2 3/16 / 1 15/16 / 1 ¾ in. )
0 - 45°
160/149 mm ( 6 ¼ / 5 ¾ in. )
1.2 mm ( 3/64 in. )
1.8 mm ( 5/64 in. )
20 mm
35 mm ( 1 3/8 in. )
3,3 kg (7.27 lbs)
253 x 309 x 235 mm ( 9 7/8 x 12 1/8 x 9
1/4 in.)
Workplace-related emission value
92 dB (A)
93 dB (A)
-16-
110 V~, 50 Hz
1100 W
10 W
4200 rpm
2650 rpm