Bushnell TROPHY CAM HD ESSENTIAL Manual De Instrucciones página 21

Parameter
NV (Night
Vision) Shutter
Format
Time Stamp
(only affects still
photos)
Field Scan
Settings
(Bold=default)
High, Medium,
Low
Execute
Off, On
On, Off
(After On is
selected): "A"
Start/Stop, "B"
Start/Stop,
Interval
Description
Affects the shutter speed during Night
Vision operation. High will freeze
motion better, but photos may be
darker. A Low shutter speed setting
will produce brighter photos, but rapid
motion may be blurred. Medium is a
good compromise.
Deletes (erases) all files stored on a
card to prepare it for reuse. Always
format a card that has been previously
used in other devices. Caution! Make
sure you have downloaded and
backed up any files you want to
preserve first! Press OK to execute,
press MENU (or select NO then press
OK) to exit without formatting.
Select "On" if you want the date &
time (that the photo was captured)
imprinted on every photo, select "Off"
for no imprint.
Turns Field Scan (Time Lapse) record-
ing mode on/off. When activated, Field
Scan forces the camera to take photos
or videos even when it is not triggered
by a nearby live animal, useful for con-
stant monitoring of an area that might
be far away from the camera. The user
can set the start and stop times for up
to two independent "blocks" of Field
Scan recording, as well as the interval
time between each photo/video. To
ensure correct operation, avoid setting
overlapping start/stop times for Field
Scan A and B. Please read the "Field
Scan 2x..." section of this manual for
details on using this feature.
21