Introduction; Connections, Control And Display Elements - Cameo OPUS SP5 Manual De Usuario

INTRODUCTION

MOVING HEAD OPUS SERIES
CLOSP5P (Profiler)
CONTROL FUNCTIONS
34-channel and 50-channel DMX control (SP5P)
27-channel and 33-channel DMX control (SP5 with optional CLOSP5AM animation wheel module)
Art-Net
sACN
W-DMX™
RDM enabled
Master / slave mode
Stand-alone functions
PROPERTIES
500W LED. Framing shutter module. CMY + CTO color mixture. Color wheel with 7 brilliant colors + open and split colors. Gobo wheel 1 with
8 fixed gobos + open. Gobo wheel 2 with 7 rotating gobos + open (gobos interchangeable). 2 rotating prisms. Focusing and
zoom function via DMX. Frost filter and iris. Stroboscopic. Pan and tilt motors with 16 bit resolution. Battery-powered display for
configuration when not connected to power. Automatic position correction. Temperature-controlled fans. 3- and 5-pin DMX connector. RJ45
network connector. Wireless DMX™. Neutrik powerCON TRUE1 mains connector, IN and OUT. 2 omega mounting brackets included.
Operating voltage: 100-240V AC. Power consumption: 800W.
The spotlight has the RDM standard (Remote Device Management). This device manager allows the user to request the status of and
configure RDM end devices via an RDM-capable controller.
ADDITIONAL FEATURES
The CLOSP5P moving head is equipped and delivered with a 4-plane framing shutter module. The 4-plane framing shutter module can be
replaced with the optional CLOSP5AM animation wheel module. The device software and corresponding DMX modes will adjust automatically.

CONNECTIONS, CONTROL AND DISPLAY ELEMENTS

8
3
POWER IN
1
Neutrik powerCON TRUE1 mains input socket. Operating voltage: 100 - 240V AC / 50 - 60Hz. A suitable power cable with powerCON TRUE1
plug is included in delivery.
POWER OUT
2
Neutrik powerCON TRUE1 mains output socket. Serves to provide power to additional CAMEO spotlights. Ensure that the total power
consumption of all devices connected to the device does not exceeded the given Ampere (A) value.
2
1
6
4
7
5
5