Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fault
Device does not spray when the
control lever [4] is pressed
Spraying result irregular
The tank cannot be unscrewed
Accessories and spare parts
If, in spite of careful manufacturing and test proce-
dures, the device becomes faulty, contact Würth
masterService to arrange a repair.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.
Accessories
Flexible hose
Wax probe, 90° 2D jet
Wax probe, straight, 3D
hollow jet
Wax probe, straight, 3D
solid jet
Troubleshooting
Possible cause
No air supply, compressed air
reducer [WB] closed
Vertical tube dirty or blocked
Residual pressure in the tank
Item
0891 110 002
Remedy
Compressed air reducer [WB]
or air regulator [2] open
Clean all tubes and
spray nozzle
Never tip the device
through more than 45°
Pull on the ring of the safety
valve [11]
Disposal
The large majority of the components or our applica-
tors are made of easily recyclable materials. Please
hand your applicator over to an approved waste
disposal centre so that it can be disposed of cor-
rectly and the individual parts recycled.
17
Tabla de contenido
